| Section 2.2 | Preselection highlighting |
| Section 2.3 | Enhanced color selection |
| Section 2.4 | Enhanced printing on Windows platforms |
| Section 2.5 | The Model Tree |
| Section 2.6 | Saving your display options and GUI settings |
| Section 2.7 | Suppressing and resuming step-dependent objects |
| Section 2.8 | Support for 3Dconnexion motion controllers |
| Section 2.9 | Exporting to VRML |
| Section 2.11 | Display group enhancements |
| Section 2.14 | Viewport annotations and tools |
| Section 3.1 | Parallel execution |
| Section 3.6 | Enhancements to the input file and output database upgrade utility |
| Section 3.7 | Direct submission of input files for analysis in ABAQUS/CAE |
| Section 4.1 | Introducing dependent part instances |
| Section 4.2 | Filleting and chamfering shell edges |
| Section 4.3 | Creating patterns of instances |
| Section 4.4 | Contact constraint moved |
| Section 4.5 | Translating and rotating part instances with existing constraints applied |
| Section 4.6 | Regeneration of position constraints |
| Section 4.7 | Angle query |
| Section 4.8 | Sketcher tools and enhancements |
| Section 4.9 | Partitioning a cell with a sketch |
| Section 4.10 | ABAQUS/CAE colors different sides of a shell surface |
| Section 4.11 | Using selection groups during selection procedures |
| Section 4.12 | Merging groups of sets or surfaces |
| Section 4.15 | Defining a nonstructural mass |
| Section 5.1 | Import part from output database enhanced |
| Section 5.2 | New geometry repair tools added |
| Section 6.1 | Transferring results between ABAQUS analyses |
| Section 6.4 | Extension of adaptive meshing in ABAQUS/Standard |
| Section 6.5 | Contact iterations in ABAQUS/Standard |
| Section 6.6 | Reading temperatures from a previous analysis |
| Section 6.7 | Enhancements to the submodeling analysis procedure |
| Section 6.8 | Modal damping and eigenmode selection by frequency range |
| Section 6.10 | Residual modes |
| Section 7.1 | Hyperelastic and viscoelastic material evaluation |
| Section 7.2 | Creating a material when you create a section |
| Section 7.3 | Section assignment enhancements |
| Section 7.4 | Shell and beam section editor enhancements |
| Section 8.1 | Continuum shell elements: ABAQUS/CAE support |
| Section 8.3 | Connector elements: new connection types and kinematics |
| Section 8.4 | New connector behaviors |
| Section 8.6 | Cohesive elements |
| Section 9.1 | Distributed surface tractions and edge loads |
| Section 10.1 | Surface-to-surface tie constraint formulation |
| Section 10.3 | Embedding beam and shell elements into solid elements |
| Section 11.1 | Surface-to-surface small-sliding contact accounting for thickness |
| Section 11.3 | Accounting for shell offsets in the general contact algorithm |
| Section 11.4 | Specifying feature edge criteria and pure master-slave assignments for general contact interactions |
| Section 11.5 | Customizing contact controls |
| Section 11.8 | Defining concentrated convective and radiative behavior |
| Section 11.11 | Stabilization of multi-body contact problems with rigid body modes |
| Section 12.1 | Defining skin reinforcements |
| Section 12.2 | Defining point mass and rotary inertia in ABAQUS/CAE |
| Section 12.3 | Defining damping in ABAQUS/CAE |
| Section 12.4 | Defining heat capacitance in ABAQUS/CAE |
| Section 12.5 | Defining a crack in ABAQUS/CAE |
| Section 12.6 | Defining springs and dashpots in ABAQUS/CAE |
| Section 13.1 | Meshing parts |
| Section 13.2 | Merging meshed parts |
| Section 13.3 | Support for curvature-based part seeding |
| Section 13.4 | New tetrahedral meshing algorithm |
| Section 13.5 | Improved advancing front quad-dominated meshes |
| Section 13.6 | Querying the mesh stack direction |
| Section 13.7 | Orienting the mesh stack direction for orphan meshes |
| Section 13.8 | Converting orphan meshes to gasket elements |
| Section 13.9 | Editing the mesh and preserving the user's intent |
| Section 13.10 | Using the Edit Mesh toolset to adjust the position of midside nodes |
| Section 13.11 | Using the Edit Mesh toolset to create an offset mesh |
| Section 14.6 | Support for ABAQUS/CAE plug-ins |
| Section 14.7 | Plug-in to display mode contribution factors |
| Section 15.1 | View manipulation and camera options |
| Section 15.2 | Enhanced color coding |
| Section 15.3 | Size control for displayed symbols |
| Section 15.4 | Enhancements to stress linearization |
| Section 15.5 | Creating paths using element edges or circular features |
| Section 15.6 | Integrated output over a surface |
| Section 15.8 | Accessing a remote output database |
| Section 15.9 | Job diagnostics enhancements |
| Section 15.10 | Connector output |
| Section 15.11 | Filtering and improved output |
| Section 15.12 | Viewing the interior of a model |
| Section 15.15 | Vector image output |
| Section 15.16 | Results averaging and contour plot limits |
| Section 16.1 | Materials, sections, and section assignments in the output database |
| Section 16.2 | Mass and inertia data in the output database |
| Section 16.3 | Tab completion from the command line interface |
| Section 16.4 | Approach to verifying a model database has changed |