| Section 2.10 | Memory reductions for ABAQUS/Explicit analyses |
| Section 2.13 | Performance improvements for ABAQUS import models |
| Section 3.1 | Parallel execution |
| Section 3.3 | Enhancements to the translator for NASTRAN bulk data files |
| Section 3.4 | Enhancements to the translator for NASTRAN Output2 files |
| Section 3.5 | Translating PAM-CRASH input files to partial ABAQUS input files |
| Section 3.6 | Enhancements to the input file and output database upgrade utility |
| Section 4.13 | Defining interior cross-section surfaces |
| Section 4.15 | Defining a nonstructural mass |
| Section 6.1 | Transferring results between ABAQUS analyses |
| Section 6.3 | Removal of limitations for domain-level parallelization in ABAQUS/Explicit |
| Section 6.6 | Reading temperatures from a previous analysis |
| Section 6.7 | Enhancements to the submodeling analysis procedure |
| Section 6.9 | Fluid-structure interaction |
| Section 7.5 | Progressive damage and failure |
| Section 7.6 | Energy dissipation in elastomeric foams |
| Section 7.7 | Kinematic hardening plasticity in ABAQUS/Explicit |
| Section 7.8 | Evaluation of strain-rate-dependent data in ABAQUS/Explicit |
| Section 7.9 | Orthotropic elastic-plasticity in ABAQUS/Explicit |
| Section 8.2 | Continuum shell elements: modified through-thickness modulus |
| Section 8.3 | Connector elements: new connection types and kinematics |
| Section 8.4 | New connector behaviors |
| Section 8.5 | Enhanced orientation definition methods |
| Section 8.6 | Cohesive elements |
| Section 8.8 | Change in default hourglass control method for elements modeled with finite-strain elasticity |
| Section 8.9 | Change in default element distortion control for solid elements modeled with finite-strain elastic materials |
| Section 9.1 | Distributed surface tractions and edge loads |
| Section 10.1 | Surface-to-surface tie constraint formulation |
| Section 10.3 | Embedding beam and shell elements into solid elements |
| Section 10.4 | New fastener interface using connector elements |
| Section 11.3 | Accounting for shell offsets in the general contact algorithm |
| Section 11.6 | Specifying initial clearances and controlling initial overclosure adjustments for general contact |
| Section 11.9 | Controlling nodal erosion for general contact |
| Section 11.10 | Performance improvements for general contact |
| Section 15.6 | Integrated output over a surface |
| Section 15.7 | Whole surface contact output in general contact |
| Section 15.10 | Connector output |
| Section 15.11 | Filtering and improved output |