Section 2.12 | Performance improvements for ABAQUS/Standard models with many section and/or material definitions |
Section 2.13 | Performance improvements for ABAQUS import models |
Section 3.1 | Parallel execution |
Section 3.2 | Parallel execution of the element operations in ABAQUS/Standard |
Section 3.3 | Enhancements to the translator for NASTRAN bulk data files |
Section 3.4 | Enhancements to the translator for NASTRAN Output2 files |
Section 3.6 | Enhancements to the input file and output database upgrade utility |
Section 4.13 | Defining interior cross-section surfaces |
Section 4.14 | Defining matrices |
Section 4.15 | Defining a nonstructural mass |
Section 6.1 | Transferring results between ABAQUS analyses |
Section 6.2 | Enhancements to the steady-state transport procedure and symmetric model generation technique |
Section 6.4 | Extension of adaptive meshing in ABAQUS/Standard |
Section 6.5 | Contact iterations in ABAQUS/Standard |
Section 6.6 | Reading temperatures from a previous analysis |
Section 6.7 | Enhancements to the submodeling analysis procedure |
Section 6.8 | Modal damping and eigenmode selection by frequency range |
Section 6.9 | Fluid-structure interaction |
Section 6.10 | Residual modes |
Section 6.11 | Enhancements to the iterative equation solver |
Section 7.6 | Energy dissipation in elastomeric foams |
Section 8.2 | Continuum shell elements: modified through-thickness modulus |
Section 8.4 | New connector behaviors |
Section 8.5 | Enhanced orientation definition methods |
Section 8.6 | Cohesive elements |
Section 8.7 | Assigning element properties on an element-by-element basis |
Section 8.8 | Change in default hourglass control method for elements modeled with finite-strain elasticity |
Section 9.1 | Distributed surface tractions and edge loads |
Section 10.1 | Surface-to-surface tie constraint formulation |
Section 10.2 | Performance improvements for deformable elements declared as rigid |
Section 10.3 | Embedding beam and shell elements into solid elements |
Section 10.4 | New fastener interface using connector elements |
Section 11.1 | Surface-to-surface small-sliding contact accounting for thickness |
Section 11.2 | Improved contact stresses for second-order elements |
Section 11.7 | Performance improvements for interacting radiation heat transfer |
Section 11.11 | Stabilization of multi-body contact problems with rigid body modes |
Section 11.12 | Elimination of multiple state and model files during element reordering |
Section 14.1 | User subroutine to define the magnitude and loading directions of nonuniform distributed surface tractions, edge loads, and edge moments |
Section 14.2 | User subroutine to specify mesh motion constraints during adaptive meshing |
Section 14.3 | Utility routine to determine elements adjacent to a node |
Section 14.4 | Utility routine to read results data averaged at a node |
Section 14.5 | Utility routine to read nodal results data |
Section 15.10 | Connector output |
Section 15.11 | Filtering and improved output |
Section 15.13 | Substructure matrix output |
Section 15.14 | Steady-state dynamic output enhancements |