To define a concentrated radiative interaction:

From the main menu bar, select InteractionCreate.

Tip:  You can also create a concentrated radiative interaction using the tool in the Interaction module toolbox.

In the Create Interaction dialog box that appears, do the following:

Name the interaction. For more information about naming objects, see “Using basic dialog box components,” Section 3.2.1.

Select the step. You can define radiation from a nodal area only during a heat transfer, coupled temperature-displacement, or coupled thermal-electrical step.

Select the Concentrated radiation to ambient type of interaction.

Click Continue to close the Create Interaction dialog box.

Use one of the following methods to select the points:

Use an existing set of nodes or vertices to define the region. On the right side of the prompt area, click Sets. Select an existing set from the Region Selection dialog box that appears, and click Continue.

Note:  The default selection method is based on the selection method you most recently employed. To revert to the other method, click Select in Viewport or Sets on the right side of the prompt area.

Use the mouse to select nodes or vertices in the viewport. (For more information, see “Selecting objects within the current viewport,” Section 6.2.)

If the model contains a combination of orphan mesh instances and native geometric part instances, click one of the following from the prompt area:

• Click Geometry if you want to select vertices from native geometry.

• Click Mesh if you want to select nodes from an orphan mesh.

You can use the angle method to select a group of nodes from an orphan mesh. For more information, see “Using the angle method to select multiple objects,” Section 6.2.3.

In the Edit Interaction dialog box that appears, perform the following steps:

If desired, specify how the concentrated radiation condition is applied to the boundary of an adaptive mesh domain. This option is valid only for ABAQUS/Explicit analyses. Click the arrow to the right of the Adaptive mesh boundary type field, and select an option from the list that appears. For more information, see “Defining ALE adaptive mesh domains in ABAQUS/Explicit,” Section 12.2.2 of the ABAQUS Analysis User's Manual.

Select Lagrangian to apply a concentrated radiation condition to a node that follows the material (nonadaptive).

Select Sliding to apply a concentrated radiation condition to a node that can slide over the material. Mesh constraints are typically applied to the node to fix it spatially.

Select Eulerian to apply a concentrated radiation condition to a node that can move independently of the material. This option is used only for boundary regions where the material can flow into or out of the adaptive mesh domain. Mesh constraints must be used normal to an Eulerian boundary region to allow material to flow through the region. If no mesh constraints are applied, an Eulerian boundary region will behave in the same way as a sliding boundary region.

In the Associated nodal area field, enter the area associated with the node where the concentrated radiation condition is applied.

In the Emissivity field, enter the emissivity of the surface, .

In the Ambient temperature field, enter the ambient temperature, .

If you want to vary the ambient temperature with time, click the arrow to the right of the Ambient temperature amplitude field and select the amplitude of your choice from the list that appears. If desired, click Create to create a new amplitude; see “Creating an amplitude,” Section 38.3, for more information.

Specify the absolute zero temperature, , on the temperature scale being used and the Stefan-Boltzmann constant, , in the Edit Model Attributes dialog box, as described in “Editing model attributes,” Section 9.8.4.

Click OK to create the interaction and to close the editor.