Products: ABAQUS/Standard ABAQUS/Explicit ABAQUS/CAE
The features described in this section are used to model cohesive elements using a continuum approach, which assumes that the cohesive zone contains material of finite thickness that can be modeled using the conventional material models in ABAQUS. If the cohesive zone is very thin and for all practical purposes may be considered to be of zero thickness, the constitutive response is commonly described in terms of a traction-separation law; this alternative approach is discussed in Defining the constitutive response of cohesive elements using a traction-separation description, Section 18.5.6.
The constitutive response of cohesive elements modeled as a continuum:
can be defined in terms of macroscopic material properties such as stiffness and strength using conventional material models;
can be specified in terms of either a built-in material model or a user-defined material model; and
can include the effects of material damage and failure in ABAQUS/Explicit.
The implementation of the conventional material models (including user-defined models) in ABAQUS for cohesive elements is based on certain assumptions regarding the state of the deformation in the cohesive layer. Two different classes of problems are considered: modeling of an adhesive layer of finite thickness and modeling of gaskets.
Modeling of damage with cohesive elements for these classes of problems can be carried out only in ABAQUS/Explicit (see Progressive damage and failure: overview, Section 11.6.1, for details regarding the damage models currently available in ABAQUS/Explicit). You may need to alter the damage model for an adhesive material to account for the fact that the failure of an adhesive bond may occur at the interface between the adhesive and the adherend rather than within the adhesive material.
When used with conventional material models in ABAQUS, cohesive elements use true stress and strain measures. When used with a material model that is based on a traction-separation description (see Defining the constitutive response of cohesive elements using a traction-separation description, Section 18.5.6, for details on this approach), cohesive elements use nominal stress and strain measures.
The frequency characteristics of cohesive elements are accounted for by the algorithms to automatically choose the time increment in ABAQUS/Explicit (Explicit dynamic analysis, Section 6.3.3). In many applications involving adhesives or gaskets cohesive elements may be quite thin compared to the other elements, which tends to decrease the stable time increment. See Stable time increment in ABAQUS/Explicit” in “Modeling with cohesive elements, Section 18.5.3, for further discussion on this topic, including suggestions on how to avoid significant reductions in the stable time increment when using cohesive elements.
For adhesive layers with finite thickness it is assumed that the cohesive layer is subjected to only one direct component of strain, which is the through-thickness strain, and to two transverse shear strain components (one transverse shear strain component for two-dimensional problems). The other two direct components of the strain (the direct membrane strains) and the in-plane (membrane) shear strain are assumed to be zero for the constitutive calculations. More specifically, the through-thickness and the transverse shear strains are computed from the element kinematics. However, the membrane strains are not computed based on the element kinematics; they are simply assumed to be zero for the constitutive calculations. These assumptions are appropriate in situations where a relatively thin and compliant layer of adhesive bonds two relatively rigid (compared to the adhesive) parts. The above kinematic assumptions are approximately correct everywhere inside the cohesive layer except around its outer edges.
An additional linear elastic transverse shear behavior can be defined to provide more stability to cohesive elements, particularly after damage has occurred. The transverse shear behavior is assumed to be independent of the regular material response and does not undergo any damage.
Input File Usage: | Use the following options (the second option is needed only to define uncoupled transverse shear response): |
*COHESIVE SECTION, RESPONSE=CONTINUUM *TRANSVERSE SHEAR STIFFNESS |
ABAQUS/CAE Usage: | Property module: Create Section: select Other as the section Category and Cohesive as the section Type: Response: Continuum |
Transverse shear behavior is not supported in ABAQUS/CAE for cohesive sections. |
The modeling of gaskets and/or small adhesive patches involves situations where there are no lateral constraints on the cohesive layer. Hence, the layers are free to expand in the lateral direction in a stress-free manner. Application areas include individual spot welds and gaskets. The constitutive calculations assume only one direct stress component, which is the through-thickness normal stress. All other stress components, including the transverse shear stress components, are assumed to be zero.
The gasket modeling capability that is offered with this option has some advantages compared to the family of gasket elements in ABAQUS/Standard. The cohesive elements are fully nonlinear (the element kinematics properly account for finite strains as well as finite rotations), can contribute mass and damping in a dynamic analysis, and are available in ABAQUS/Explicit. The gasket response modeled in the above manner is similar to modeling using the special-purpose gasket elements in ABAQUS/Standard with thickness-direction behavior only (see Including gasket elements in a model, Section 18.6.3).
Uncoupled, linear-elastic transverse shear behavior, if desired, can be defined. The transverse shear behavior may either define the response of the gasket and/or adhesive patch or provide stability after damage has occurred in the response in the thickness direction. There is no damage associated with the transverse shear response.
Input File Usage: | Use the following options (the second option is needed only to define uncoupled transverse shear response): |
*COHESIVE SECTION, RESPONSE=GASKET *TRANSVERSE SHEAR STIFFNESS |
ABAQUS/CAE Usage: | Property module: Create Section: select Other as the section Category and Cohesive as the section Type: Response: Gasket |
Transverse shear behavior is not supported in ABAQUS/CAE for cohesive sections. |
All standard output variables in ABAQUS (ABAQUS/Standard output variable identifiers, Section 4.2.1, and ABAQUS/Explicit output variable identifiers, Section 4.2.2) are available for cohesive elements that are used with conventional material models. The stresses due to the additional transverse shear response are reported separately using the output variables TSHR13 and (in three dimensions) TSHR23. These stresses are not added to the usual material point stresses reported using the output variable S.