3.2 Plasticity and creep

ABAQUS Benchmarks Manual

3.2 Plasticity and creep

“Uniformly loaded, elastic-plastic plate,” Section 3.2.1
“Test of ORNL plasticity theory under biaxial loading,” Section 3.2.2
“One-way reinforced concrete slab,” Section 3.2.3
“Triaxial tests on a saturated clay,” Section 3.2.4
“Uniaxial tests on jointed material,” Section 3.2.5
“Verification of creep integration,” Section 3.2.6
“Simple tests on a crushable foam specimen,” Section 3.2.7
“Simple proportional and nonproportional cyclic tests,” Section 3.2.8
“Biaxial tests on gray cast iron,” Section 3.2.9
“Indentation of a crushable foam plate,” Section 3.2.10
“Notched unreinforced concrete beam under 3-point bending,” Section 3.2.11
“Mixed-mode failure of a notched unreinforced concrete beam,” Section 3.2.12
“Slider mechanism with slip-rate-dependent friction,” Section 3.2.13
“Cylinder under internal pressure,” Section 3.2.14
“Creep of a thick cylinder under internal pressure,” Section 3.2.15
“Pressurization of a thick-walled cylinder,” Section 3.2.16
“Stretching of a plate with a hole,” Section 3.2.17
“Pressure on infinite geostatic medium,” Section 3.2.18