Matlab Fanuc Robot Control

From ESE497 Wiki
Revision as of 17:06, 4 April 2016 by Ed (talk | contribs)
Jump to navigationJump to search

<mediaplayer width=720 height=504>FILE:2015-10-02_16.53.54.flv</mediaplayer>IMG 1188.JPG

Example of moving the robot to a specific location from Matlab:

  • Place marker and metal can exactly as shown above
  • Turn on Robot
    • Menu -> Setup -> Frames
      • Verify Tool Frame 1 is set to [0,0,0]
      • Verify Tool Frame 2 is set to [0,0,95.3] so that the TCP is at the end of the gripper
    • Launch LV_COM_FRM on Teaching Pendant following instructions at Fanuc_How_Tos,_FAQ,_etc.#FAQ
    • Download FanucLabviewKinect.zip from Matlab Fanuc Kinect
  • Run Matlab2Fanuc.m
Retrieved from "http://classes.engineering.wustl.edu/ese497/index.php?title=Matlab_Fanuc_Robot_Control&oldid=2777"