File:Frame Model.PNG
Jump to navigation
Jump to search
Size of this preview: 421 × 600 pixels. Other resolutions: 168 × 240 pixels | 448 × 638 pixels.
Original file (448 × 638 pixels, file size: 70 KB, MIME type: image/png)
The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 21:34, 14 December 2016 | | 448 × 638 (70 KB) | Fordicejw (talk | contribs) | The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing. |
| 21:23, 14 December 2016 |  | 448 × 638 (70 KB) | Fordicejw (talk | contribs) | The .SLDPRT file for the frame. Note the holes in the bottom which were used to screw the base of the frame to the bottom stepper motor. The slots in the bridge and left-hand prong are used for cable routing. |
You cannot overwrite this file.
File usage
The following page uses this file:
