Cycle Charger

Overview

Energy is all around us, but on a near daily basis we find ourselves low on charge by the end of the day. The objective of Cycle Charger is to harness the rotational energy of a bicycle ride and store the energy in a battery for a late day boost. Cycle Charger aims to be completely out of the way, requiring no user input beyond riding and plugging in.

Team Members

• Kyle Cummings
  
• Nathan Genstein
  
• Kaylynn Williamson
  
• Sam Chai (TA)
  

Objectives

Generate:

• Through the use of a "bottle dynamo" we will use the rotation of the wheel of the bike to rotate magnets in the presence of a copper coil to generate electricity.
  

Convert:

• Using a "rectifier" we will convert the AC current created from the generator into DC current. Then a capacitor will be used to generate smooth current that a phone can use.
  

Store:

• We will then feed the generated current into a battery that is fastened to the bike where it will be stored. There will also be a detachable portable charger that will be charged from the main battery.

Challenges

• Learning how to properly assemble a bottle dynamo.
• Sizing the components of the bottle dynamo properly to avoid friction/ rapid unscheduled disassembly.
• Fastening the components to the bicycle in such a way that the wires won't come loose with the vibration of the bike.
• Wiring the battery in such a way that the fluctuation in the energy generation does not damage the components.

Budget

Copper Wire - given
Iron Core - given
Permanent Magnets - given
Cased Wire - given