Electric Longboard

Project Overview

Our goal in this project was to modify the Longboard riding experience. In particular, when riding a Longboard for commuting or exercise there is no way to certainly know how far or fast one has ridden. Using a GPS chip and an encoder on the wheel we programmed a Raspberry Pi 2 Model B to collect data from the board. We could then display the data on a map of the area tracing the route taken. This design enhances the Longboard riding experience by making it interactive and goal driven, while also yielding tangible results.

Team Members

• Max Cetta
• Jacob Frank
• Alden Welsch (TA)

Objectives

1. Use GPS data to track distance and location of rides
   1. Use the serial port to connect to the GPS.
   2. Read data and write it into a text file.
   3. Display data
2. Have an encoder on the wheel to measure top ground speed and average speed over a ride
   1. Designing and printing the encoder
   2. Wiring the ADC and using SPI pins to communicate with the Raspberry Pi
   3. Writing code to filter and interpret the data to locate peaks

Challenges

1. Receiving data from the GPS chip
2. Interpreting the data
   • Isolating desired data from the GPS data stream which provided other information that was not useful for our project
3. Displaying the data
   • How to get the data off the Raspberry Pi
   • Easily displaying it on a map
4. Designing Encoder
   • Ensuring mount would attach to the truck of the Longboard
   • Making sure the mounts were able to house the LED and photocell reliably and safely
   • Stabilizing results across all lighting conditions and riding surfaces
5. Hooking up the Analog to Digital Converter
   • Locating the SPI pins and correctly wiring them to the ADC
   • Building the voltage divider
   • Choosing the resistance to use for more rapid photocell saturation
6. Writing code to read the ADC values, filter, and interpret them
   • Creating a properly sized filter to stabilize noise in data
   • Locating a peak in the data and ensuring that only 1 peak was counted
7. Environmental effects on GPS accuracy
   • Concrete, heavy clouds and other structures will obscure view to satellites
   • Locating and eliminating unreliable data
   • Substituting encoder data for these instances
8. Mounting
   • Taking all of our components and putting them in a compact container which can be secured to the longboard
   • Maintaining as light a design as possible considering the board is being manually powered
   • Keeping all the components safe and dry

Budget

Item	Quantity	Price	Vendor	Link
GPS Receiver - GP-20U7 (56 Channel)	1	$15.95	Sparkfun	https://www.sparkfun.com/products/13740
Mini Photocell	2	$1.50	Sparkfun	https://www.sparkfun.com/products/9088
Analog to Digital Converter - MCP3002	1	$2.30	Sparkfun	https://www.sparkfun.com/products/8636
Raspberry Pi 2 - Model B (8GB Bundle)	1	$49.95	Sparkfun	https://www.sparkfun.com/products/13724
Resistor Kit - 1/4W (500 total)	1	$7.95	Sparkfun	https://www.sparkfun.com/products/10969
LED - Basic Green 5mm	2	$0.35	Sparkfun	https://www.sparkfun.com/products/9592
Tontec® Raspberry Pi Case	1	$7.98	Amazon	http://www.amazon.com/Tontec%AE-Raspberry-Black-Enclosure-Transparent/dp/B00NUN98UW?ie=UTF8&psc=1&redirect=true&ref_=od_aui_detailpages00
KMASHI 10000mAh Battery	1	$13.99	Amazon	http://www.amazon.com/KMASHI-10000mAh-External-Battery-Portable/dp/B00JM59JPG?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
Total		$101.82

Gantt Chart

Timeline