Accelerometer + Arduino

From ESE205 Wiki
Revision as of 19:24, 5 December 2018 by Gillian laming (talk | contribs)
Jump to navigation Jump to search

Overview

This tutorial will cover how to hook up an Arduino with an MMA845 accelerometer. After completing this tutorial, you will be able to read in acceleration data from the x, y, and z directions. Although the MMA845 accelerometer is compatible with all Arduino types, this tutorial will handle hooking up the accelerometer with the Arduino Uno.

Materials and Prerequisites

  • MMA8451 Accelerometer
  • Arduino (we used an Arduino Uno, but will work with any kind of Arduino)
  • Breadboard
  • Two 330 Ω resistors
  • Connector cables
  • Soldering materials (if the headers have not been soldered already)

Setting Up Circuit

We will be using I2C, so there will only need to be two connections between the arduino and the sensor. For more information about I2C, refer to this tutorial.

The materials you will need for this part of the process is the breadboard, MMA845 accelerometer, the resistors, and the Arduino.

Below, you will see a diagram for the circuit. You need to put the accelerometer somewhere on the breadboard, and connect the power (3.3V) and ground with the Arduino. Using the two 330 Ω resistors, connect the SLC port on the Arduino with the SLC port on the accelerometer so that it goes through the resistance. Do the same for the SDA port. Once you have completed the circuit, you are ready to connect the Arduino with your computer.
Circuit diagram.pdf.png

Downloading Libraries

The nice thing about using this accelerometer is that it comes with libraries that will allow you to quickly start reading in data. Before you download anything though, make sure you have the latest version of the Arduino IDE. If you

      To download the library, click this link.

If you do not know how to install an Arduino library, follow the links below.

  • Installing a library on a Mac: link
  • Installing a library on a Windows: link

Once you install the library, restart the Arduino. Upon reboot, go to:

    File > Examples > SFE_MMA8452Q > MMA8452Q_Basic

Open the example sketch, upload it to your Arduino, and run the script. Once it is running, open the serial monitor to see the acceleration values. The far-left column will be the x-acceleration, the middle column is the y-acceleration, and the far-right column is the z-acceleration. To the right of the z-acceleration, you will see the orientation of the accelerometer.

Serial-monitor-example.png


Authors

  • Gillian Laming

Published fall 2018.

Group Link

Our project was called Zesty Vesty. See below for links to our project page and weekly log.
Weekly log
Link to project page

External References

https://learn.sparkfun.com/tutorials/mma8452q-accelerometer-breakout-hookup-guide