MedLit

From ESE205 Wiki
Jump to navigation Jump to search

Project Overview


Description

This project will create a way for users to always remember to take time-sensitive medication as well as have that medication readily available. A bracelet that holds a weekly supply of medication will alert the wearer at a certain time each day to take said medication. The problem we are tackling with this device is the issue with certain time sensitive medication, particularly birth control. In the case of birth control, perfect use (taken at same time each day) leads to more than 99% effective birth control, whereas imperfect use is only about 92% effective. This device will help the wearer to reach "perfect use" of their medication.

Link to weekly log

Project Proposal

Link to Tutorial

Group Members

  • Lauren Bhambri
  • Moira Mulholland
  • Anton Salem
  • John Fordice (TA)

Objectives

A successful project would include:

  • 1. A Wearable bracelet (bangle) that slips on
    • wide enough to fit a hand through while being tight enough to stay on
    • printed using the 3D printer
  • 2. A minimum of 7 compartments that fit most birth control pills
    • compartments are accessed through screw on caps
  • 3. LED reminder every 24 hours
    • LED light goes off at the same time each day, reminding wearer to take medication
    • able to turn off light when medication is taken
  • Reach Goals:
    • motor to vibrate bracelet when timer for medication goes off
    • create water resistant bracelet
    • LED light indicating power supply of bracelet
    • lights up red when battery is low

Challenges

Challenges we foresee for this project include:

Software
  • Finding a microprocessor that is the right balance between small, workable, and inexpensive
  • Programming the microprocessor and understanding the program needed
  • programming a 24 hour timer
Mechanics
  • Creating a bracelet design that will efficiently fit all pieces
  • 3D printing the bracelet so that we may insert our electronics in it
  • 3D printing with two different materials, urethane for the majority of the bracelet and PLA for the cases holding the pills
  • Finding a way to check battery level without using too much charge in the process
  • designing and printing screw on caps for each pill compartment
Electronics
  • connecting battery, ATTiny, and LED lights properly with wires

Design Milestones and Solutions

Some preliminary work we accomplished includes working with the AtTiny to light an LED, using solid works to design a pill capsule, and designing and printing a preliminary bracelet.

Our Preliminary Bracelet Design
Our Preliminary Compartment/Screw Cap Design
Our First Bracelet Print


Our greatest design issue thus far has been designing a pill case. Printing threading for a screw on cap is difficult due to the sizing of the thread. Our current solution is to print cases similar to a rubber stopper that will be held into the holes of the bracelet via friction, while also locking into place by adding a knob to the cap that fits into an indent in the compartment. This ended up working well and staying in place so that the pill is securely held within the bracelet's compartments.

Software

We successfully coded a program that took in a delay time and turned on the LED when the time period ended. Follow this link to see more: https://acsalem@bitbucket.org/medlit/medlit.git

Mechanics

After many different designs, we finally found one that worked for us. It was more ideal to pause the printing halfway through, insert the electronics, and finish printing the top half. This fully enclosed the electronics in the bracelet without having to glue any parts together.

Here is the link to our public CAD files: MedLit on GrabCAD

Electronics

We accurately soldered the ATtiny, LED, button, and wires together in a way that fit within our desired bracelet size.

Budget

Total: $31.16

Cost per individual bracelet: $3.83

Future Work

In the future, we would like to make our product customizable in the following ways:

  • Additional button that allows the user to set the timer for a specific, changeable amount of time
  • Different size pill compartments for different medications
  • Color customization

We would also like to add the following designs to our project:

  • Additional lights on each compartment so the user needs to know which pill to take at each time
  • Vibration alert
  • LED alert when battery supply is low

Mass Production

Mass production would be more efficient and cheaper long term to pay for an injection mold which usually cost about $1,000. The other pieces of the bracelet is cheaper when bought in high volumes:

300 Bracelets would cost about $563.36 which gives a price of $1.88 per bracelet


Safety Concerns

A major consideration of our bracelet is the importance of safety. We are trying to allow women to have better access to their medication, which means that our capsules must be absolutely secure. If our pill capsules were to open or break and a pill is lost there would be serious repercussions. Not only would losing a pill affect the efficacy of pill based birth control, but headaches and nausea could also ensue. Fortunately we worked hard to design the most stable lid possible with the use of 3D printing. Unfortunately, the 3D printed knob that we use to secure the lid in the capsule is likely too brittle for long term use. If we were to actually manufacture this bracelet, we would need a more sturdy material to secure our lids and would need it to pass several stress tests. As we do not want to risk the consumers health.


Gantt Chart

Final gant chart.png