Laser Harp Weekly Log

Link to Project page

Laser_Harp

01/28/2019

• Jennifer and Taylor [3 hrs] - Worked on setting up Wiki account and project proposal. Did some research on building different types of laser harps.
• Yoojin [4 hrs]: Researched on the different types of laser harps (framed/frameless). Created the Gantt chart based on overlapping procedures. Looked into the Night Light project to be able to finish it in the upcoming week with Jennifer, since Taylor already understands the procedure. Started making PowerPoint slides for the Project Proposal Presentation.

02/04/2019

• 02/07/2019 and 02/08/2019: Jennifer and Yoojin [4 hrs] - Researched how to use a bread board and Ardunio and completed the night light and Ardunio assignments.

• 

  Night light made with 2 LEDs.

• Night light created with 2 LEDs.

• 

  Blinking LED executed with Arduino.

• Blinking LED executed using Arduino.

02/11/2019

• Taylor [30 min] - CAD Tutorial/practice
• Taylor[30 min] - MIDI research
• 02/14/2019: Jennifer [1 hr] - sketched plan for soldering the night light and made sure circuit functioned on bread board.
• Whole group [3.5 hrs]

1. 02/15/2019: Soldered; finished Arduino with switch (Night Light); reviewed presentation
2. 02/16/2019: Created case for Night Light using Fusion 360 and sent file to Chance (TA); ordered parts from Amazon

• 02/17/2019: Jennifer [30 min] - sketched harp design ( dimensions subject to change ).

• 
• 

02/18/2019

• 2/19/2019 - Taylor [30 minutes] - Raspberry Pi laser harp research
• 2/20/19 - Taylor [30 minutes] - Raspberry Pi setup/ssh configuration
• 2/22/19 - whole group [2 hours] - raspberry pi blink code, analog digital converter setup
• 2/23/19 - whole group [2 hours ] - CAD design for photoresistor and lasers

• Blinking LED using Rasberry Pi