PartyBox log

1/22 - 1/28

• Group finalized PartyBox project idea
• General objectives: LED array, modular and connectable, response to live music, different modes, wireless (if time permits)
• Wiki page published

1/29 - 2/4

• Group met with TA Nathan to discuss project proposal and demo.
• Developed finer ideas of project (center cube with processor and power, no wireless, only music and standby modes, and modularity with plugs flush to cube surface).
• Drafted and finished a project proposal, including a Gantt chart.
• Agreed upon minimum weekly meeting, Monday at 7pm

2/5 - 2/11

• Met with Nathan and discussed issues with the previously submitted proposal, most importantly the need for an additional arduino on the second cube
• Met separately as a group and:
  • Sketched out a basic picture of what we’re brainstorming
    • Add sketch to proposal?
    • LEDs 4 x 4 x 4 with none on bottom where Arduino is located
  • Reevaluated how we would get the two cubes to connect
    • Considered more complicated mechanisms, such as force sensors, but ultimately decided on just wiring the inputs and outputs of the two arduinos together using male/female plugs
  • Fix Budget
    • Removed items we previously thought we would need (micro-USB)
    • Add new objects to connect the cubes
      • Physically: Magnets? (Could be too expensive) 3D Print locking mechanism?
      • Plugs/wires straight from an output port of one Arduino to an input port of the other
    • Specify resistors
    • Magnets, microphones, acrylic adhesive, counters, transistors
  • Fix formatting of proposal
  • Adjust Gantt chart
    • More time for physical construction
    • More actions occurring simultaneously
  • Add more details to the overview in the proposal (size specifications, reason for two cubes)