Difference between revisions of "RFID CheckIn"
Jump to navigation
Jump to search
| Line 22: | Line 22: | ||
==Gantt Chart== | ==Gantt Chart== | ||
| − | + | •Learning how to code the Raspberry Pi/Arduino | |
| − | + | •Creating the console | |
| − | + | •Testing with RFID chips | |
| − | + | •Programming the software | |
| − | + | •Setting up the server | |
| − | + | •Debugging the software | |
| − | + | •Connecting the software to the hardware | |
| − | + | •Creating the poster | |
| − | + | •Demonstration | |
==Weekly Log== | ==Weekly Log== | ||
Revision as of 04:24, 5 February 2018
Contents
Team Members
Eliot Stein
Zach Steinberg
Hannah Lester
Nathan (TA)
Project Description
Our project is an organization system designed to be used to keep track of tools in a lab. It involves RFID chipping/tagging the tools and creating software that monitors the time at which someone checks in and out the tools and can display this information, if requested. This could be used in labs to ensure that tools are not damaged or misplaced, and if they are, then the log will be able to determine when and by whom the tool was misplaced and/or damaged.
Challenges
Some challenges we may face are: -Connecting the software to the hardware, RFID chips and check in check out console -Learning how to properly implement our software to meet our desired goals. -Learning how to use RFID chips and raspberry pi/Arduino. -Making sure each group member understands the software in its entirety.
Materials and Budget
(For Zach)
Gantt Chart
•Learning how to code the Raspberry Pi/Arduino •Creating the console •Testing with RFID chips •Programming the software •Setting up the server •Debugging the software •Connecting the software to the hardware •Creating the poster •Demonstration
