Difference between revisions of "SecuriDoor"
| Line 53: | Line 53: | ||
=== Final Locking Mechanism === | === Final Locking Mechanism === | ||
CLAYTON | CLAYTON | ||
| − | [[File:IMG 2070.MOV.mov]] | + | <br /> |
| + | <br /> | ||
| + | <br /> | ||
| + | |||
| + | [[File:IMG 2070.MOV.mov|thumb|Our locking mechanism in action during our Demo Session]] | ||
=== Final Website=== | === Final Website=== | ||
Revision as of 02:48, 3 December 2017
Contents
Overview
Have you ever left the house and, hours later, fretted over whether you locked your door? It's a familiar feeling--and one that can be avoided. Our project can be used to solve this all-too-common problem. Through our website interface, a user can remotely lock their door and eliminate the worry associated with common forgetfulness. Using the website, a user will be able to command the physical aspects of our design to activate a servo which pushes the door's lock into place.
Find our weekly log here
Group Members
- Clayton Keating
- Savannah Rush
- Nathan Schmetter (TA)
Objective
We will achieve success with this project if we are able to effectively lock and unlock a door using a locking mechanism on the Raspberry Pi via a website. Specifically, the communication between the site and the locking mechanism is the focus of this success and must execute without error for success to be achieved. We must also transmit an image taken from a webcam on the Pi and display it on the website. Additionally, our project has the potential to include more features, such as motion sensors and alarms for further home security.
Our final project demonstration will consist of short and long range tests of the system to show off the site's realistic use.
Challenges
- Familiarization with Raspberry Pi
- Building a housing mechanism such that it can be attached to a door
- Ensuring that the app cannot lock you out of your own home
- Maximizing range of communication between locking mechanism and web application
- Ensuring security of the website
Gantt Chart
Budget
- MCM Electronics TowerPro SG-5 Standard Servo-$11.99
- MCM Electronics Raspberry Pi 3 Model B Board and Case Kit-$42.99
- Single Cylinder Bright Brass Residential Deadbolt-$10.48
- 2 in. x 4 in. x 8 ft. #2 Prime Cedar-Tone Ground Contact Pressure-Treated Lumber-$4.98
- Website Hosting and Domain (Essential Plan)-$5.95/month for total of $17.85
- 3D Printing Materials (Free -- Provided)
- Breadboard and Resistors (Free -- Provided)
Total Budget: $88.29
Design and Solutions
Design Components
Clayton: talk about the locking mechanism, case, etc
User Interface
Server
Security
Results
Final Locking Mechanism
CLAYTON
Final Website
Demo Poster
Comparison to Objectives
CLAYTON
Critical Decisions
Potential Project Extensions
Tutorial
Find our tutorial here.
