Difference between revisions of "WTM Sense"

From ESE205 Wiki
Jump to navigation Jump to search
Line 32: Line 32:
  
 
== Gantt Chart ==
 
== Gantt Chart ==
[[File:G_Chart_JustInCase.png|frame|Gantt Chart|100px]]
+
[[File:G_Chart_JustInCase.png|frame|100px|Gantt Chart]]
  
 
== Budget ==
 
== Budget ==

Revision as of 21:54, 15 February 2017

Overview

Design and construct a docking station for an iPhone 6, that includes the following features:

  • Speaker that amplifies the sound
  • Display that shows weather and time
  • Motion sensors that use specific hand patterns and motions to turn the speaker on and off, change the volume, and play/pause songs

Objectives

Throughout our Systems Science and Engineering curriculum, our group realized we have had little experience with modeling, 3D printing, and computer programming. For this reason, we decided to take this class and spend the semester learning and constructing a 3D printed model that could be specialized through a developed and scripted code. We brainstormed the first two weeks different products we would like to own and use in our daily lives that would be interesting and rigorously challenging to create.

We decided to create a Speaker Dock design because we have all come across the problem of trying to play a video or song from our phones when the volume is not loud enough for everyone listening to hear. We came up with the idea of creating a speaker that not only amplifies the sound, but also allows for other design features including an easier way to turn the device on and off, and easy access to the time and weather. This speaker would most importantly play the music louder than the average phone as well as present specific information such as the current time and weather.

For our demo, the user can plug their phone into the dock (if they have an iPhone 6) or use a provided iPhone 6, to test out our speaker. They can use the speaker to play a song, look at the time or weather, and most importantly use their hand as a simple tool to adjust and see each of these features.

Team Members

  • Audrey Freeman, Sophomore, Bachelors of Science in Systems Science and Engineering, Minor Candidate in Operation Supply Chain Management
  • Savannah Johnson, Senior, Bachelors of Science in Systems Science and Engineering, Minor in Psychology
  • Ariel Stern, Senior, Bachelors of Science in Systems Science and Engineering, Minor Candidate in Operation Supply Chain Management
  • TA: Andrew O'Sullivan

Challenges

  • User safety: The wires and jumper cables we're using to connect the phone to the speaker cannot shock the user
  • Phone safety: We can't send too strong of a current through the Aux cord and 'fry' the user's phone
  • Privacy Considerations: The cameras in the leap motion sensor cannot record the room, so the user isn't being 'spied' on
  • Learn python and how to code a display
  • Learn how to integrate raspberry pi with leap motion
  • Defining hand motions with leap motion to mean specific controls
  • Learn how to make a circuit using a breadboard
  • Figure out how to get around iPhone's chip that doesn't allow for other products to access controls
  • Learn how to use Fusion360 (Autodesk) and how to design a functional model to be 3D printed
  • Figure out how to amplify sound from the headphone jack using an aux cord and amplifier and build a simple circuit connecting it to a speaker

Gantt Chart

Gantt Chart

Budget

Total: $117.09