Difference between revisions of "MagSpoof Log"
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
:Both<br> | :Both<br> | ||
:Time: 1 Hour | :Time: 1 Hour | ||
| − | -obtained permission from campus services for the project | + | -obtained permission from campus services for the project<br> |
:Both<br> | :Both<br> | ||
:Time: N/A | :Time: N/A | ||
-preliminary design for multi-card circuit <br> | -preliminary design for multi-card circuit <br> | ||
:Nathan<br> | :Nathan<br> | ||
| − | :Time:2 Hours | + | :Time: 2 Hours |
[[File:Screen Shot 2017-09-21 at 3.56.56 PM.png| 600px| Design 1]]<br> | [[File:Screen Shot 2017-09-21 at 3.56.56 PM.png| 600px| Design 1]]<br> | ||
:-design 1 has the use of a single input to change card and activate device. | :-design 1 has the use of a single input to change card and activate device. | ||
Revision as of 20:41, 22 September 2017
Week 9/8/2017 - 9/15/2017
-acquired Arudino
- Nathan
- Time: N/A
-found magnetic swiper
- Nathan
- Time 30 min
-created parts list w/ costs
- Jon
- Time: 30 min
Week 9/15/2017 - 9/22/2017
-configure mac bootcamp for windows on Jon's computer
- Jon
- Time: 30 min
-Download and use software to read swipe card info off of washu id
- Both
- Time: 1 Hour
-obtained permission from campus services for the project
- Both
- Time: N/A
-preliminary design for multi-card circuit
- Nathan
- Time: 2 Hours
- -design 1 has the use of a single input to change card and activate device.
- -Card indicator has an enable LED, and 2 LED's to mark which card is being used
- -Design 2 has the use of two input system, on to activate device and one to change cards
- -Card indicator has an enable LED, and 1 LED to mark which card is being used
-Wrote Ethics Section of Proposal
- Jon
- Time: 1 Hour
