Difference between revisions of "Sunlight Alarm"
Jump to navigation
Jump to search
(→Budget) |
|||
| Line 39: | Line 39: | ||
*Raspberry Pi (supplied)<br /> | *Raspberry Pi (supplied)<br /> | ||
| − | *LCD and Keypad https://www.adafruit.com/product/ | + | *[https://www.adafruit.com/product/1115 LCD and Keypad] <br /> |
| − | *Stepper motor (2?) (at least | + | *[https://www.adafruit.com/product/2348 Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit]<br /> |
| + | *Stepper motor (2?) (at least 1 supplied)<br /> | ||
*Battery to power stepper motor<br /> | *Battery to power stepper motor<br /> | ||
| − | * | + | *[http://www.homedepot.com/p/2-in-x-4-in-x-96-in-Premium-Kiln-Dried-Whitewood-Stud-161640/202091220 22ft of 2X4s] <br /> |
| − | *1 inch #8 wood screws<br /> | + | *[1 inch #8 wood screws]<br /> |
| − | * 4 Straight brackets for side of frame<br /> | + | * [4 Straight brackets for side of frame]<br /> |
*Light sensor?<br /> | *Light sensor?<br /> | ||
*Solar panel and associated battery? | *Solar panel and associated battery? | ||
Revision as of 21:21, 17 September 2017
Contents
Proposal
We hope to create an apparatus that opens your window shades automatically in the morning, acting as a nicer way to wake up than an annoying alarm. Our apparatus would use a stepper motor to open the shades paired with a Raspberry Pi. The stimuli to open the shades would be based on time as inputted by the user using a keypad attached to an LCD. The LCD would display the current time as well as the current weather.
Possible Add-ons:
- Stimuli to open shades based on light sensor
- Second stepper motor/mechanism to control orientation of slats
- Motor powered by solar panel
Overview
Overall objectives:
- Build frame and shade
- Program Raspberry Pi display LCD (time and weather)
- Use NTP
- Program Raspberry Pi to accept input from user
- Program Raspberry Pi to control motors
- Program Raspberry Pi to respond to stimuli
- 3D print pieces to attach blind to shade
- Attach motors to frame/shade
- up/down pull-string
- twist bar
Team Members
- Sam Chai
- Cole Fitzsimmons
- Arnob Dam
Objectives
Challenges
- Learn how to use Autodesk AutoCAD
- We will use AutoCAD to 3D print gears, clamps and other physical parts for the opening/closing function of our device
- Learn how to program Raspberry Pi
- We are using Raspberry Pi instead of Arduino because we will need Raspberry Pi's capability to access the internet. Through the internet, we will have access to and display both time and weather
Gantt Chart
Budget
note" Still need to add prices and links
- Raspberry Pi (supplied)
- LCD and Keypad
- Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
- Stepper motor (2?) (at least 1 supplied)
- Battery to power stepper motor
- 22ft of 2X4s
- [1 inch #8 wood screws]
- [4 Straight brackets for side of frame]
- Light sensor?
- Solar panel and associated battery?
