Difference between revisions of "Ultrasonic Sensor (HC-SR04) + Raspberry Pi"
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
* Jumper wires to connect the sensor(s) to the pi | * Jumper wires to connect the sensor(s) to the pi | ||
− | |||
==Wire setup== | ==Wire setup== | ||
+ | |||
+ | [[File:Wire setup.png|200px|thumb|right|Connecting resistors and jumper wires between sensors and pi]] | ||
==Software== | ==Software== |
Revision as of 17:43, 2 May 2017
Hardware
- Raspberry pi 3
- Ultrasonic Sensor - HC-SR04
- A set of resistors for each sensor you are connecting
- 330Ω and 470Ω
- Jumper wires to connect the sensor(s) to the pi
Wire setup
Software
Python
Create a new script
- Link to repository with script to detect the distance of an object in front of the sensor
Save your script as ultrasonic_distance.py
- Go to File and click on Save as
- In the field Save in browse for the C: drive and then select a folder to save in
- For the field File name type in ultrasonic_distance.py
- In the field Save as type select All Files
- Click on Save
Use the terminal to run the script
- Click on the monitor icon on the top of the screen
- Type cd "folder name" to change directory to your pythonpractice folder, and hit Enter
- Type ultrasonic_distance.py and hit Enter to run your program