Difference between revisions of "Holograms At Home Log"
Jump to navigation
Jump to search
Line 13: | Line 13: | ||
*modified project proposal | *modified project proposal | ||
*redesigned pole to be hollow so wires can be held inside the pole | *redesigned pole to be hollow so wires can be held inside the pole | ||
+ | *redesigned layers with tolerance on connecting parts | ||
==2/14/17== | ==2/14/17== |
Revision as of 20:19, 12 February 2017
1/29/17
- created first draft of the project proposal.
- explored alternate project possibilities, including displaying just on a cylindrical surface, removing inner led display volume, and making the display scalable.
- considered which components to use, settled on the stepper motor.
- considered using individual LEDs or strip LEDs, and settled on individual LEDs to ensure LED can be individually controlled and visible from multiple angles.
2/7/17
- switched LED to addressable LED strip due to limited number of ports on the arduino
- tentatively decided on about 10 layers of LED
- designed pole, arudino and battery layer, and first LED layer
- 3d printed designed layers
- modified project proposal
- redesigned pole to be hollow so wires can be held inside the pole
- redesigned layers with tolerance on connecting parts