Difference between revisions of "BusyBear log"
Jump to navigation
Jump to search
Allisontodd (talk | contribs) |
Allisontodd (talk | contribs) |
||
| Line 25: | Line 25: | ||
- 02/04 | - 02/04 | ||
*Whole Group: Had meeting with Professor Feher and TA David to discuss current progress and future goals. Determined that the goals for next week will be to: | *Whole Group: Had meeting with Professor Feher and TA David to discuss current progress and future goals. Determined that the goals for next week will be to: | ||
| − | + | # Get Pi going and ready for project | |
| − | + | # Complete Blackjack website | |
| − | + | # Complete any tutorials for Pi | |
| − | + | # Download Stretch and use Etcher | |
| − | + | # Find a file for 3D printing a Pi + Camera case | |
| − | + | # Research networking | |
| − | + | # Consider other locations to test | |
45 minutes | 45 minutes | ||
-02/05 | -02/05 | ||
Revision as of 02:25, 6 February 2019
BusyBear Log
Link to Project Page
Week of 1/28/19 (1)
- 01/28
- Whole Group: Had a group meeting with Profesor Feher and discussed possible implications of our busybear concept. In addition, we researched similar projects and found a variety of sources. (https://www.crc.id.au/tracking-people-via-wifi-even-when-not-connected/ and https://www.raspberrypi.org/forums/viewtopic.php?t=47059) - 1 hour
- Whole Group: Met with David and further went over the specifics of our project including discussing the possibility of either using wifi based or camera-based system. In addition, David provided the link to some working projects that also used Arduino as well as a tutorial (https://picar.readthedocs.io/en/latest/chapters/introduction.html) - 1 hour
-01/29
- Whole Group: Looked more into proof of concepts and specific tutorial on how to track devices using wifi/Bluetooth and found a variety of in-depth albeit confusing sources. (https://makezine.com/projects/build-raspberry-pi-network-scanner/ and https://www.youtube.com/watch?time_continue=1&v=fmhjtzmLrg8 and https://zone13.io/post/wifi-monitoring-using-raspberry-pi/) - 1 hour
-01/30
- Whole Group: Met to try and finalize general goals and project. We worked on our project proposal on our Wiki page. - 2 hours
-01/31
- Allison: Finished up the project proposal by inserting the Gantt Chart into the Wiki page. - 30 minutes
-02/1
- Thomas and Tom: Worked on the nightlight and established a successful prototype. - 30 minutes
Goals for Next Week:
- Demonstrate the Night Light
- Start working on setting up an environment for the Pi
- Investigate networking and image collection for the Pi
Week of 02/04/19 (2)
- 02/04
- Whole Group: Had meeting with Professor Feher and TA David to discuss current progress and future goals. Determined that the goals for next week will be to:
- Get Pi going and ready for project
- Complete Blackjack website
- Complete any tutorials for Pi
- Download Stretch and use Etcher
- Find a file for 3D printing a Pi + Camera case
- Research networking
- Consider other locations to test
45 minutes -02/05
- Tom and Allison: Downloaded Python, set up an Amazon Web Services account, and began the Blackjack tutorial. - 2 hour
[Category:Logs]]
