Difference between revisions of "Laser Harp"
Jump to navigation
Jump to search
TDHoward55 (talk | contribs) |
|||
| Line 1: | Line 1: | ||
== Overview == | == Overview == | ||
| + | |||
== Team Members == | == Team Members == | ||
| Line 6: | Line 7: | ||
* Yoojin Kim | * Yoojin Kim | ||
* TA: Chance Bayles | * TA: Chance Bayles | ||
| + | * Instructor: Jim Feher | ||
| + | |||
| + | == Objectives == | ||
| + | |||
| + | == Challenges == | ||
| + | == Materials == | ||
| + | === Supplied === | ||
| + | * Switch | ||
| + | * Wires | ||
| + | * Mulab | ||
| + | * 4.7 kOhm resistor | ||
| + | * 220 Ohm resistor | ||
| − | == Purchased == | + | === Purchased === |
* [Lasers] - $5.48 | * [Lasers] - $5.48 | ||
* [https://www.amazon.com/gp/product/B00HV3NIRQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 photoresistors] - $9.55 | * [https://www.amazon.com/gp/product/B00HV3NIRQ?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 photoresistors] - $9.55 | ||
| Line 18: | Line 31: | ||
* Din Connector | * Din Connector | ||
* Power Supply | * Power Supply | ||
| − | |||
| − | |||
== References == | == References == | ||
Revision as of 18:33, 29 January 2019
Contents
Overview
Team Members
- Taylor Howard
- Jennifer Fleites
- Yoojin Kim
- TA: Chance Bayles
- Instructor: Jim Feher
Objectives
Challenges
Materials
Supplied
- Switch
- Wires
- Mulab
- 4.7 kOhm resistor
- 220 Ohm resistor
Purchased
- [Lasers] - $5.48
- photoresistors - $9.55
- arduino proto shield - $11.99
- Midi Interface
- Midi Cable
- Pin Headers
- Din Connector
- Power Supply
References
https://www.instructables.com/id/Arduino-Laser-Harp-1/
https://www.instructables.com/id/Quick-Arduino-MIDI-Laser-Harp/
