Difference between revisions of "OpenCV4"

From ESE205 Wiki
Jump to navigation Jump to search
 
(34 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
=== Process ===
 
=== Process ===
 
==== Install OpenCV====
 
==== Install OpenCV====
−
Follow these instruction<ref>Open CV instruction:[https://www.pyimagesearch.com/2018/09/26/install-opencv-4-on-your-raspberry-pi/ Link]</ref> to install OpenCV onto your Raspberry Pi using the terminal.  
+
Follow these [https://www.pyimagesearch.com/2018/09/26/install-opencv-4-on-your-raspberry-pi/ instruction]<ref>Open CV instruction:[https://www.pyimagesearch.com/2018/09/26/install-opencv-4-on-your-raspberry-pi/ Link]</ref> to install OpenCV onto your Raspberry Pi using the terminal.  
  
−
*Important note: don't do <code>make-j4</code>. It may freeze so it best to just do <code>make</code> or <code>make-j1</code>.
+
*'''Important note''': Don't do <code>make-j4</code> since the raspberry pi may freeze so it best to just do <code>make</code> or <code>make-j1</code>.
  
  
Line 17: Line 17:
  
 
==== Capturing image====
 
==== Capturing image====
−
  [[File:cam.PNG|500px|thumb|left|Taking picture code]]
+
  [[File:cam.PNG|400px|thumb|left|Taking picture code]]
−
Following these step to set up your camera<ref>Setting up camera:[https://www.dexterindustries.com/howto/installing-the-raspberry-pi-camera/ Link]</ref>
+
Following these step to [https://www.dexterindustries.com/howto/installing-the-raspberry-pi-camera/ set up your camera]<ref>Setting up camera:[https://www.dexterindustries.com/howto/installing-the-raspberry-pi-camera/ Link]</ref>
  
−
*Note: Ignoring GoPiGo installation.
+
Note: Ignoring GoPiGo installation.
  
  
−
Once the camera is set up, it is ready to take pictures. In order to capture image, follow these instruction <ref>Capturing Image:[https://medium.com/@petehouston/capture-images-from-raspberry-pi-camera-module-using-picamera-505e9788d609 Link]</ref>
+
Once the camera is set up, it is ready to take pictures. In order to capture image, follow these [https://medium.com/@petehouston/capture-images-from-raspberry-pi-camera-module-using-picamera-505e9788d609 instruction] <ref>Capturing Image:[https://medium.com/@petehouston/capture-images-from-raspberry-pi-camera-module-using-picamera-505e9788d609 Link]</ref>
−
 
 
  
  
Line 32: Line 31:
 
Note:  
 
Note:  
  
−
*Use <code>sleep</code> (measured in seconds) to create a delay between the preview:  <code>time.sleep(seconds)</code>
+
**Use <code>sleep</code> (measured in seconds) to create a delay between the preview:  <code>time.sleep(seconds)</code>
−
 
 
−
*Another way to enable your camera is: go to the terminal → type in <code>sudo raspi-config</code> → select <code>Enable Camera</code> → press Enter → select <code>Finish</code> → reboot and log back on to the Raspberry Pi.
 
−
 
 
  
 +
**Another way to enable your camera is: go to the terminal → type in <code>sudo raspi-config</code> → select <code>Enable Camera</code> → press Enter → select <code>Finish</code> → reboot and log back on to the Raspberry Pi.
  
 
==== Edge Detector====
 
==== Edge Detector====
Line 42: Line 39:
 
Once you have a picture, you may want to use edge detection to detect the chessboard region of interest.  
 
Once you have a picture, you may want to use edge detection to detect the chessboard region of interest.  
  
−
Follow these instruction for Canny edge detection<ref>Canny edge detection:[https://opencv-python-tutroals.readthedocs.io/en/latest/py_tutorials/py_imgproc/py_canny/py_canny.html Link]</ref>
+
Follow these instruction for [https://opencv-python-tutroals.readthedocs.io/en/latest/py_tutorials/py_imgproc/py_canny/py_canny.html Canny edge detection]<ref>Canny edge detection:[https://opencv-python-tutroals.readthedocs.io/en/latest/py_tutorials/py_imgproc/py_canny/py_canny.html Link]</ref>
  
 
* Note: Scroll down to the Explanation section.
 
* Note: Scroll down to the Explanation section.
 +
 +
Follow this [https://docs.opencv.org/3.4.0/dd/d1a/group__imgproc__feature.html#ga04723e007ed888ddf11d9ba04e2232de/ Link]<ref name="a">Parameter:[https://docs.opencv.org/3.4.0/dd/d1a/group__imgproc__feature.html#ga04723e007ed888ddf11d9ba04e2232de/ Link]</ref>if you want to see its parameters.(search for Canny Edge)
  
 
In order to use build-in function in Open CV: remember to <code>import</code> cv2. In the instruction, the <code>import</code> cv2 <code>as</code>cv means that you can now type in cv instead of cv2 when using build-in function.  
 
In order to use build-in function in Open CV: remember to <code>import</code> cv2. In the instruction, the <code>import</code> cv2 <code>as</code>cv means that you can now type in cv instead of cv2 when using build-in function.  
  
 
   
 
   
−
 
  
 
Ex:
 
Ex:
Line 57: Line 55:
 
Then use:  
 
Then use:  
 
*dst = <code>cv.Canny</code>(src, 50, 200, None, 3)
 
*dst = <code>cv.Canny</code>(src, 50, 200, None, 3)
−
 
−
 
  
 
==== Houghline Transformation====
 
==== Houghline Transformation====
−
  [[File:cam.PNG|350px|thumb|left|Sample Houghline Transformation]]
+
  [[File:lines.PNG|550px|thumb|left|Sample Houghline Transformation]]
 
Using the Canny Edge detection to find the region of interest(edges of the image) prior to the Houghline Transformation,one can now ready to use the Hougline Tranformation.
 
Using the Canny Edge detection to find the region of interest(edges of the image) prior to the Houghline Transformation,one can now ready to use the Hougline Tranformation.
  
−
The process should be: capturing an image→Threshhold→Canny Edge Detection→Houghline Transformation.
 
  
−
Follow the following instruction for Houghline Transformation.<ref>Houghline Transformation:[https://docs.opencv.org/3.4.0/d9/db0/tutorial_hough_lines.html Link]</ref>
+
The process should be: capturing an image→Canny Edge Detection→Houghline Transformation.
  
−
Example:
 
  
−
<code>lines = cv.HoughLines(dst, 1, np.pi / 180, 150, None, 0, 0)</code>
+
Follow the following instruction for [https://docs.opencv.org/3.4.0/d9/db0/tutorial_hough_lines.html Houghline Transformation].<ref>Houghline Transformation:[https://docs.opencv.org/3.4.0/d9/db0/tutorial_hough_lines.html Link]</ref>
 +
 
 +
Follow this [https://docs.opencv.org/3.4.0/dd/d1a/group__imgproc__feature.html#ga04723e007ed888ddf11d9ba04e2232de/ Link]<ref name="a" />if you want to see its parameters.(search for Hough Line)
  
  
 +
Example:
  
 +
<code>lines = cv.HoughLines(dst, 1, np.pi / 180, 150, None, 0, 0)</code>
  
 
=== Sample Projects ===
 
=== Sample Projects ===

Latest revision as of 18:52, 12 December 2018

Overview

This is a tutorial on how to install OpenCV4 and use camera module.

Materials/Prerequisites

  • Raspberry Pi
  • Raspberry Pi Camera

Process

Install OpenCV

Follow these instruction[1] to install OpenCV onto your Raspberry Pi using the terminal.

  • Important note: Don't do make-j4 since the raspberry pi may freeze so it best to just do make or make-j1.


After you have successfully installed OpenCV, you will be able to use import cv2. If you do it on the terminal, you want to put in these code source ~/.profile and then workon cv.

Capturing image

Taking picture code

Following these step to set up your camera[2]

Note: Ignoring GoPiGo installation.


Once the camera is set up, it is ready to take pictures. In order to capture image, follow these instruction [3]



Note:

    • Use sleep (measured in seconds) to create a delay between the preview: time.sleep(seconds)
    • Another way to enable your camera is: go to the terminal → type in sudo raspi-config → select Enable Camera → press Enter → select Finish → reboot and log back on to the Raspberry Pi.

Edge Detector

Sample Edge Detector

Once you have a picture, you may want to use edge detection to detect the chessboard region of interest.

Follow these instruction for Canny edge detection[4]

  • Note: Scroll down to the Explanation section.

Follow this Link[5]if you want to see its parameters.(search for Canny Edge)

In order to use build-in function in Open CV: remember to import cv2. In the instruction, the import cv2 ascv means that you can now type in cv instead of cv2 when using build-in function.


Ex: To load image:

  • src = cv.imread(filename, cv.IMREAD_GRAYSCALE)

Then use:

  • dst = cv.Canny(src, 50, 200, None, 3)

Houghline Transformation

Sample Houghline Transformation

Using the Canny Edge detection to find the region of interest(edges of the image) prior to the Houghline Transformation,one can now ready to use the Hougline Tranformation.


The process should be: capturing an image→Canny Edge Detection→Houghline Transformation.


Follow the following instruction for Houghline Transformation.[6]

Follow this Link[5]if you want to see its parameters.(search for Hough Line)


Example:

lines = cv.HoughLines(dst, 1, np.pi / 180, 150, None, 0, 0)

Sample Projects

  • ESE205-CVChess/board_Recognition.py [7]
  • DE3-ROB1-CHESS/perception.mainDetect[8]

Authors

  • Nhut Dang
  • Robert Goodloe
  • Ethan Shry(TA)

Fall 2018

Group Link

Group page

Group weekly log

References

  1. ↑ Open CV instruction:Link
  2. ↑ Setting up camera:Link
  3. ↑ Capturing Image:Link
  4. ↑ Canny edge detection:Link
  5. ↑ 5.0 5.1 Parameter:Link
  6. ↑ Houghline Transformation:Link
  7. ↑ ESE205-CVChess/board_Recognition.py :Links
  8. ↑ DE3-ROB1-CHESS/perception.mainDetect: Links
Retrieved from "http://classes.engineering.wustl.edu/ese205/core/index.php?title=OpenCV4&oldid=15663"