Difference between revisions of "Accelerometer + Arduino"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
* Arduino (we used an Arduino [https://store.arduino.cc/usa/arduino-uno-rev3 Uno], but will work with any kind of Arduino) | * Arduino (we used an Arduino [https://store.arduino.cc/usa/arduino-uno-rev3 Uno], but will work with any kind of Arduino) | ||
* Breadboard | * Breadboard | ||
| − | * | + | * Two 330 Ω resistors |
| + | * Connector cables | ||
| + | * Soldering materials (if the headers have not been soldered already) | ||
| + | |||
==Process== | ==Process== | ||
Revision as of 17:14, 4 December 2018
Contents
Overview
Materials and Prerequisites
- MMA8451 Accelerometer
- Arduino (we used an Arduino Uno, but will work with any kind of Arduino)
- Breadboard
- Two 330 Ω resistors
- Connector cables
- Soldering materials (if the headers have not been soldered already)
Process
Authors
- Gillian Laming
Published fall 2018.
Group Link
Weekly log
Link to project page
External References
https://learn.sparkfun.com/tutorials/mma8452q-accelerometer-breakout-hookup-guide
