Pattern Matching Assignment

Hints and Gotchas

Hints and Gotchas

Instructions

All credit for this assignment goes to Prof. Grossman and his team at UW. UW or Coursera

Code To Implement

You will define several SML functions. Many will be very short because they will use other higher-order functions. You may use functions in ML’s library; the problems point you toward the useful functions and often require that you use them. The sample solution is about 120 lines, including the provided code, but not including the challenge problem. This assignment is probably more difficult than Homework 2 even though (perhaps because) many of the problems have 1-line answers.

String Functions

1) only_captials

Write a function only_capitals that takes a string list and returns a string list that has only the strings in the argument that start with an uppercase letter. Assume all strings have at least 1 character. Use List.filter, Char.isUpper, and String.sub to make a 1-2 line solution.

2) longest_string1

Write a function longest_string1 that takes a string list and returns the longest string in the list. If the list is empty, return "". In the case of a tie, return the string closest to the beginning of the list. Use foldl, String.size, and no recursion (other than the implementation of foldl is recursive).

3) longest_string2

Write a function longest_string2 that is exactly like longest_string1 except in the case of ties it returns the string closest to the end of the list. Your solution should be almost an exact copy of longest_string1. Still use foldl and String.size.

4) longest_string_helper, longest_string3, and longest_string4

Write functions longest_string_helper, longest_string3, and longest_string4 such that:

• longest_string3 has the same behavior as longest_string1 and longest_string4 has the same behavior as longest_string2.
• longest_string_helper has type (int * int -> bool) -> string list -> string (notice the currying). This function will look a lot like longest_string1 and longest_string2 but is more general because it takes a function as an argument.
• If longest_string_helper is passed a function that behaves like > (so it returns true exactly when its first argument is strictly greater than its second), then the function returned has the same behavior as longest_string1.
• longest_string3 and longest_string4 are defined with val-bindings and partial applications of longest_string_helper.

5) longest_capitalized

Write a function longest_capitalized that takes a string list and returns the longest string in the list that begins with an uppercase letter, or "" if there are no such strings. Assume all strings have at least 1 character. Use a val-binding and the ML library’s o operator for composing functions. Resolve ties like in problem 2.

6) rev_string

Write a function rev_string that takes a string and returns the string that is the same characters in reverse order. Use ML’s o operator, the library function rev for reversing lists, and two library functions in the String module. (Browse the module documentation to find the most useful functions.)

Utilities For Pattern Matching

The next two problems involve writing functions over lists that will be useful in later problems.

7) first_answer

Write a function first_answer of type (’a -> ’b option) -> ’a list -> ’b (notice the 2 arguments are curried). The first argument should be applied to elements of the second argument in order until the first time it returns SOME v for some v and then v is the result of the call to first_answer. If the first argument returns NONE for all list elements, then first_answer should raise the exception NoAnswer. Hints: Sample solution is 5 lines and does nothing fancy.

8) all_answers

Write a function all_answers of type (’a -> ’b list option) -> ’a list -> ’b list option (notice the 2 arguments are curried). The first argument should be applied to elements of the second argument. If it returns NONE for any element, then the result for all_answers is NONE. Else the calls to the first argument will have produced SOME lst1, SOME lst2, ... SOME lstn and the result of all_answers is SOME lst where lst is lst1, lst2, ..., lstn appended together (order doesn’t matter).

Hints: The sample solution is 8 lines. It uses a helper function with an accumulator and uses @. Note all_answers f [] should evaluate to SOME [].

Pattern Matching

The remaining problems use these type definitions, which are inspired by the type definitions an ML implementation would use to implement pattern matching:

datatype pattern = Wildcard 
                 | Variable of string 
                 | UnitP 
                 | ConstP of int
                 | TupleP of pattern list 
                 | ConstructorP of string * pattern
datatype valu = Const of int 
              | Unit 
              | Tuple of valu list 
              | Constructor of string * valu

Given valu v and pattern p, either p matches v or not. If it does, the match produces a list of string * valu pairs; order in the list does not matter. The rules for matching should be unsurprising:

• Wildcard matches everything and produces the empty list of bindings.
• Variable s matches any value v and produces the one-element list holding (s,v).
• UnitP matches only Unit and produces the empty list of bindings.
• ConstP 17 matches only Const 17 and produces the empty list of bindings (and similarly for other integers).
• TupleP ps matches a value of the form Tuple vs if ps and vs have the same length and for all i, the ith element of ps matches the ith element of vs. The list of bindings produced is all the lists from the nested pattern matches appended together.
• ConstructorP(s1,p) matches Constructor(s2,v) if s1 and s2 are the same string (you can compare them with =) and p matches v. The list of bindings produced is the list from the nested pattern match. We call the strings s1 and s2 the constructor name.
• Nothing else matches.

9) count_wildcards, count_wild_and_variable_lengths, and count_some_var

(This problem uses the pattern datatype but is not really about pattern-matching.) A function g has been provided to you.

9a) count_wildcards

Use g to define a function count_wildcards that takes a pattern and returns how many Wildcard patterns it contains.

9b) count_wild_and_variable_lengths

Use g to define a function count_wild_and_variable_lengths that takes a pattern and returns the number of Wildcard patterns it contains plus the sum of the string lengths of all the variables in the variable patterns it contains. (Use String.size. We care only about variable names; the constructor names are not relevant.)

9c) count_some_var

Use g to define a function count_some_var that takes a string and a pattern (as a pair) and returns the number of times the string appears as a variable in the pattern. We care only about variable names; the constructor names are not relevant.

10) check_pat

Write a function check_pat that takes a pattern and returns true if and only if all the variables appearing in the pattern are distinct from each other (i.e., use different strings). The constructor names are not relevant. Hints: The sample solution uses two helper functions. The first takes a pattern and returns a list of all the strings it uses for variables. Using foldl with a function that uses @ is useful in one case. The second takes a list of strings and decides if it has repeats. List.exists may be useful. Sample solution is 15 lines. These are hints: We are not requiring foldl and List.exists here, but they make it easier.

Type Summary

val g = fn : (unit -> int) -> (string -> int) -> pattern -> int
val only_capitals = fn : string list -> string list
val longest_string1 = fn : string list -> string
val longest_string2 = fn : string list -> string
val longest_string_helper = fn : (int * int -> bool) -> string list -> string
val longest_string3 = fn : string list -> string
val longest_string4 = fn : string list -> string
val longest_capitalized = fn : string list -> string
val rev_string = fn : string -> string
val first_answer = fn : (’a -> ’b option) -> ’a list -> ’b
val all_answers = fn : (’a -> ’b list option) -> ’a list -> ’b list option
val count_wildcards = fn : pattern -> int
val count_wild_and_variable_lengths = fn : pattern -> int
val count_some_var = fn : string * pattern -> int
val check_pat = fn : pattern -> bool
val match = fn : valu * pattern -> (string * valu) list option
val first_match = fn : valu -> pattern list -> (string * valu) list option

val typecheck_patterns = fn : (string * string * typ) list * pattern list -> typ option

Test

file:	unit_test_hw3.sml
source folder:	src/test/sml/hw3

Test your functions. The unit tests you have been provided are intentionally minimal.

Pledge, Acknowledgments, Citations

file:

lab-3-card-game-date-pledge-acknowledgments-citations.txt

More info about the Honor Pledge