The computations necessary to produce a contour plot from results stored in the output database depend on whether the contour plot displays values for a node-based quantity, such as displacement or velocity, or for an element-based quantity, such as stress or strain.
How node-based field output variable contour values are computed
For contour plots of node-based field output variables, contour values are obtained directly from the quantities on the output database. These values are then used without further computation to produce colored lines or colored bands on the surface of your model.
How element-based field output variable contour values are computed
For contour plots of element-based field output variables, ABAQUS/CAE applies computations to the output database results to form the contour values. The computations vary according to the following criteria:
the quantity you choose to plot (field output or discontinuities),
the averaging options you select,
the result regions you select,
the compatibility of elements included in the plot, and
the type of contour plot you request (line, banded, or quilt).
Select Result
Field Output from the main menu bar to choose the field output variable. To learn more about this topic, see “Selecting the field output to display,” Section 24.4.
Select ResultOptions from the main menu bar to choose the quantity to plot, the averaging options, the result regions, and to control the handling of incompatible elements during the computation of element-based contour values. To learn more about these topics, see “Selecting result options,” Section 24.5.
Select OptionsContourBasic from the main menu bar to choose the type of contour plot that you want. “Choosing line-, banded-, or quilt-type contours,” Section 26.4.1, contains detailed instructions on choosing the contour type.
The type of contour plot that you request governs the extrapolation applied to the results read from the output database. For line- and banded-type contours of element-based variable values, ABAQUS/CAE extrapolates results to the nodes. By default, the results are conditionally averaged after ABAQUS/CAE performs any necessary transformations and computes any requested scalar components or invariants; if desired, you can compute invariants after the results are averaged. For quilt-type contours of element-based variable values, ABAQUS/CAE extrapolates results to the element faces on the surface of your model and then takes a weighted sum to produce a single value per face. Since quilt contour values are computed for each element face individually with no averaging across element boundaries, a quilt contour plot is an effective means of displaying results on an element-by-element basis. You can choose quilt-type contours only for element-based field output variables.