ABAQUS writes diagnostic information to the output database, along with any other output that you request, as it attempts to analyze your model. The diagnostic information in the output database is a subset of the diagnostic information that is written to the message file. You can use the Job Diagnostics dialog box to access the diagnostic information written to the output database during an ABAQUS/Standard analysis job.
Note: ABAQUS/Explicit writes diagnostic information only to the message and status files; you cannot access this information through ABAQUS/CAE.
Figure 23–1 shows contact diagnostics for an ABAQUS/Standard analysis. You can choose the type of contact information that you want to view, and you can select a column to sort the table data.
You can use the Job Diagnostics dialog box to determine when an analysis ended and whether any warnings were issued. If warnings were issued during the job, you can view the warnings and assess whether your results may have been affected. The Job Diagnostics dialog box also provides more detailed information to explain the meanings of or possible causes for most warnings and errors and, if the warnings are associated with nodes or elements, to help you locate them on the model in the viewport.
You can view diagnostic information during an analysis or after it ends. However, the Job Diagnostics dialog box does not update automatically. If you view diagnostic information while an analysis is running, you must close and then reopen the output database as the analysis progresses to display any new diagnostic information.
