You can create a pore pressure boundary condition to specify the excess or total pore pressure in a porous medium. If no gravity load exists in the model, you must specify excess pore pressure. If the model contains any gravity load, you must specify total pore pressure. (For more information, see “Boundary conditions,” in “Coupled pore fluid diffusion and stress analysis,” Section 6.7.1 of the ABAQUS Analysis User's Manual.)
To specify a pore pressure:
Display the pore pressure boundary condition editor using one of the following methods:
To create a new pore pressure boundary condition, follow the procedure outlined in “Creating boundary conditions,” Section 16.8.2 (Category: Other; Types for Selected Step: Pore pressure).
To edit an existing pore pressure boundary condition using menus or managers, see “Editing step-dependent objects,” Section 3.4.12. To edit the region to which the boundary condition is applied, see “Editing the region to which a prescribed condition is applied,” Section 16.8.4.
If a Method field appears toward the top of the editor, click the arrow to the right of the field, and select one of the following:
Select Specify magnitude if you want to specify a value for the excess or total pore pressure.
Select Fixed at current magnitude if you want to fix the excess or total pore pressure magnitude at its final value from the previous general step.
If a Distribution field appears in the editor, click the arrow to the right of the field, and select one of the following:
Select Uniform to define a uniform boundary condition.
Select User-defined to define the boundary condition in user subroutine DISP. See the following sections for more information:
If you are defining the boundary condition directly in the editor (and not in user subroutine DISP), perform the following steps:
If applicable, enter the magnitude of the excess or total pore pressure in the Magnitude field.
If applicable, click the arrow to the right of the Amplitude field, and select the amplitude of your choice from the list that appears. Alternatively, you can click Create to create a new amplitude. (See Chapter 38, “The Amplitude toolset,” for more information.)
Note: The Magnitude and Amplitude fields are unavailable if you are creating the boundary condition in the initial step (in which case the magnitude is always zero) or are fixing the magnitude at its final value from the previous general step.
Click OK to save your data and to exit the editor.
If you are defining the boundary condition in user subroutine DISP, perform the following steps:
If desired, enter the pore pressure magnitude in the Magnitude field. Magnitude data that you enter in the editor are passed into the user subroutine.
(The Magnitude field is unavailable if you are creating the boundary condition in the initial step.)
Click OK to save any entered data and to exit the editor.
Enter the Job module, and display the job editor for the analysis job of interest. (For more information, see “Creating, editing, and manipulating jobs,” Section 18.5.)
In the job editor, click the General tab, and specify the file containing the user subroutine that defines the boundary condition. For more information, see “Specifying general job settings,” Section 18.6.6.
Note: You can specify only one user subroutine file in the job editor; if your analysis involves more than one user subroutine, you must combine the user subroutines into one file and then specify that file.
