11.17 Using the Part module toolbox

You can access all the Part module tools through either the main menu bar or the Part module toolbox. Figure 11–66 shows the hidden icons for all the part tools in the Part module toolbox.

Figure 11–66 The Part module toolbox.

For information on using each of the Part module tools, refer to the following sections:

“Managing parts,” Section 11.18
“Using the Create Part dialog box,” Section 11.19
“Adding a feature to a part,” Section 11.20
“Adding a solid feature,” Section 11.21
“Adding a shell feature,” Section 11.22
“Adding a wire feature,” Section 11.23
“Adding a cut feature,” Section 11.24
“Blending edges,” Section 11.27