During the import process, ABAQUS/CAE converts the entities stored in the IGES file to an internal representation recognized by ABAQUS/CAE. The IGES file can contain entities that are not recognized by ABAQUS/CAE; however, these entities are ignored during the conversion.
Table 101 lists the IGES entities that ABAQUS/CAE recognizes.
Table 101 IGES entities recognized by ABAQUS/CAE when importing a part or a sketch.
ID | Form | IGES Entity Name |
---|---|---|
100 | 0 | Circular arc |
104 | 1 | Conic arc: general |
104 | 2 | Conic arc: ellipse |
104 | 3 | Conic arc: parabola |
106 | 11 | Copious data: 2D path |
106 | 12 | Copious data: 3D path |
106 | 63 | Copious data: Closed 2D curve |
108 | 1 | Plane entity: bounded |
110 | 0 | Line |
112 | 0 | Parametric spline curve |
114 | 0 | Parametric spline surface |
116 | 0 | Point |
118 | 1 | Ruled surface |
120 | 0 | Surface of revolution |
122 | 0 | Tabulated cylinder |
123 | 0 | Direction |
124 | 0 | Transformation |
126 | 0 | Rational B-spline curve |
128 | 0 | Rational B-spline surface |
130 | 0 | Offset curve |
140 | 0 | Offset surface |
141 | 0 | Boundary entity |
142 | 0 | Curve on parametric surface |
143 | 0 | Bounded surface |
144 | 0 | Trimmed surface |
186 | 0 | MSBO |
190 | 0 | Plane surface |
192 | 0 | Right circular cylindrical surface |
194 | 0 | Right circular conical surface |
196 | 0 | Spherical surface |
198 | 0 | Toroidal surface |
502 | 1 | Vertex list |
504 | 1 | Edge list |
508 | 1 | Loop |
510 | 1 | Face |
514 | 1 | Shell |