*ACOUSTIC FLOW VELOCITY | Specify flow velocities as a predefined field for acoustic elements. | Unsupported | ABAQUS/Standard |
*ACOUSTIC MEDIUM | Specify an acoustic medium. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*ACOUSTIC WAVE FORMULATION | Specify the type of formulation in acoustic problems with incident wave loading. | Model attribute | ABAQUS/Standard ABAQUS/Explicit |
*ADAPTIVE MESH | Define an adaptive mesh domain. | Supported in the Step module; only one adaptive mesh domain can be defined per step. | ABAQUS/Standard ABAQUS/Explicit |
*ADAPTIVE MESH CONSTRAINT | Specify constraints on the motion of the mesh for an adaptive mesh domain. | Displacement and velocity adaptive mesh constraints are supported in the Step module. | ABAQUS/Standard ABAQUS/Explicit |
*ADAPTIVE MESH CONTROLS | Specify controls for the adaptive meshing and advection algorithms. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*AMPLITUDE | Define an amplitude curve. | Amplitude toolset; bubble loading is not supported. Similar functionality is available in the Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*ANNEAL | Anneal the structure. | Step module | ABAQUS/Explicit |
*ANNEAL TEMPERATURE | Specify material properties for modeling annealing or melting. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*AQUA | Define fluid variables for use in loading immersed beam-type structures. | Unsupported | ABAQUS/Aqua |
*ASSEMBLY | Begin an assembly definition. | Assembly module | ABAQUS/Standard ABAQUS/Explicit |
*ASYMMETRIC-AXISYMMETRIC | Define areas of integration for contact elements used with CAXAn or SAXAn elements. | Unsupported | ABAQUS/Standard |
*AXIAL | Used to define the axial behavior of beams. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*BASE MOTION | Define the base motion for linear, eigenmode-based, dynamic procedures. | Unsupported | ABAQUS/Standard |
*BASELINE CORRECTION | Include baseline correction. | Amplitude toolset | ABAQUS/Standard |
*BEAM ADDED INERTIA | Define additional beam inertia. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*BEAM FLUID INERTIA | Define additional beam inertia due to immersion in a fluid. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*BEAM GENERAL SECTION | Specify a beam section when numerical integration over the section is not required. | General beam sections with linear response are supported in the Property module. | ABAQUS/Standard ABAQUS/Explicit |
*BEAM SECTION | Specify a beam section when numerical integration over the section is required. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*BEAM SECTION GENERATE | Generate beam section properties for a meshed cross-section. | Unsupported | ABAQUS/Standard |
*BIAXIAL TEST DATA | Used to provide biaxial test data (compression and/or tension). | Property module | ABAQUS/Standard ABAQUS/Explicit |
*BLOCKAGE | Control contacting surfaces for blockage. | Unsupported | ABAQUS/Explicit |
*BOND | Define bonds and bonding properties. | Unsupported | ABAQUS/Explicit |
*BOUNDARY | Specify boundary conditions. | Load module; fluid cavity pressure and generalized plane strain boundary conditions are not supported. | ABAQUS/Standard ABAQUS/Explicit |
*BRITTLE CRACKING | Define brittle cracking properties. | Property module | ABAQUS/Explicit |
*BRITTLE FAILURE | Specify brittle failure criterion. | Property module | ABAQUS/Explicit |
*BRITTLE SHEAR | Define the postcracking shear behavior of a material used with the brittle cracking model. | Property module | ABAQUS/Explicit |
*BUCKLE | Obtain eigenvalue buckling estimates. | Step module | ABAQUS/Standard |
*BUCKLING ENVELOPE | Define a nondefault buckling envelope for buckling strut response of frame elements with PIPE sections. | Unsupported | ABAQUS/Standard |
*BUCKLING LENGTH | Define buckling length data for buckling strut response of frame elements with PIPE sections. | Unsupported | ABAQUS/Standard |
*BUCKLING REDUCTION FACTORS | Define buckling reduction factors for buckling strut response of frame elements with PIPE sections. | Unsupported | ABAQUS/Standard |
*BULK VISCOSITY | Modify bulk viscosity parameters. | Step module | ABAQUS/Explicit |
*C ADDED MASS | Specify concentrated added mass in a *FREQUENCY step. | Unsupported | ABAQUS/Aqua |
*CAPACITY | Define the molar heat capacity at constant pressure for an ideal gas species. | Unsupported | ABAQUS/Explicit |
*CAP CREEP | Specify a cap creep law and material properties. | Property module | ABAQUS/Standard |
*CAP HARDENING | Specify Drucker-Prager/Cap plasticity hardening. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CAP PLASTICITY | Specify the Modified Drucker-Prager/Cap plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CAST IRON COMPRESSION HARDENING | Specify hardening in compression for the gray cast iron plasticity model. | Property module | ABAQUS/Standard |
*CAST IRON PLASTICITY | Specify plastic material properties for gray cast iron. | Property module | ABAQUS/Standard |
*CAST IRON TENSION HARDENING | Specify hardening in tension for the gray cast iron plasticity model. | Property module | ABAQUS/Standard |
*CAVITY DEFINITION | Define a cavity for thermal radiation. | Unsupported | ABAQUS/Standard |
*CECHARGE | Specify concentrated electric charges in piezoelectric analysis. | Load module | ABAQUS/Standard |
*CECURRENT | Specify concentrated current in an electric conduction analysis. | Load module | ABAQUS/Standard |
*CENTROID | Define the position of the centroid of the beam section. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CFILM | Define film coefficients and associated sink temperatures at one or more nodes or vertices. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CFLOW | Specify concentrated fluid flow. | Load module | ABAQUS/Standard |
*CFLUX | Specify concentrated fluxes in heat transfer or mass diffusion analyses. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*CHANGE FRICTION | Change friction properties. | Interaction module | ABAQUS/Standard |
*CLAY HARDENING | Specify hardening for the clay plasticity model. | Property module | ABAQUS/Standard |
*CLAY PLASTICITY | Specify the extended Cam-clay plasticity model. | Property module | ABAQUS/Standard |
*CLEARANCE | Specify a particular initial clearance value and a contact direction for the slave nodes on a surface. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CLOAD | Specify concentrated forces and moments. | Load module | ABAQUS/Standard ABAQUS/Explicit ABAQUS/Aqua |
*COHESIVE SECTION | Specify element properties for cohesive elements. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*COMBINED TEST DATA | Specify simultaneously the normalized shear and bulk compliances or relaxation moduli as functions of time. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*COMPLEX FREQUENCY | Extract complex eigenvalues and modal vectors. | Step module | ABAQUS/Standard |
*CONCRETE | Define concrete properties beyond the elastic range. | Property module | ABAQUS/Standard |
*CONCRETE COMPRESSION DAMAGE | Define compression damage properties for the concrete damaged plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CONCRETE COMPRESSION HARDENING | Define hardening in compression for the concrete damaged plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CONCRETE DAMAGED PLASTICITY | Define flow potential, yield surface, and viscosity parameters for the concrete damaged plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CONCRETE TENSION DAMAGE | Define postcracking damage properties for the concrete damaged plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CONCRETE TENSION STIFFENING | Define postcracking properties for the concrete damaged plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CONDUCTIVITY | Specify thermal conductivity. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR BEHAVIOR | Begin the specification of a connector behavior. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR CONSTITUTIVE REFERENCE | Define reference lengths and angles to be used in specifying connector constitutive behavior. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR DAMAGE EVOLUTION | Specify connector damage evolution for connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR DAMAGE INITIATION | Specify connector damage initiation criteria for connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR DAMPING | Define connector damping behavior. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR DERIVED COMPONENT | Specify user-defined components in connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR ELASTICITY | Define connector elastic behavior. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR FAILURE | Define a failure criterion for connector elements. | Interaction module | ABAQUS/Explicit |
*CONNECTOR FRICTION | Define friction forces and moments in connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR HARDENING | Define the plasticity initial yield value and hardening behavior in connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR LOAD | Specify loads for available components of relative motion in connector elements. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR LOCK | Define a locking criterion for connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR MOTION | Specify the motion of available components of relative motion in connector elements. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR PLASTICITY | Define plasticity behavior in connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR POTENTIAL | Specify user-defined potentials in connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR SECTION | Specify connector attributes for connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONNECTOR STOP | Specify connector stops for connector elements. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONSTRAINT CONTROLS | Reset overconstraint checking controls. | Unsupported | ABAQUS/Standard |
*CONTACT | Begin the definition of general contact. | Interaction module | ABAQUS/Explicit |
*CONTACT CLEARANCE | Define contact clearance properties. | Unsupported | ABAQUS/Explicit |
*CONTACT CLEARANCE ASSIGNMENT | Assign contact clearances between surfaces in the general contact domain. | Unsupported | ABAQUS/Explicit |
*CONTACT CONTROLS | Specify additional controls for contact. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONTACT CONTROLS ASSIGNMENT | Assign contact controls for the general contact algorithm. | Unsupported | ABAQUS/Explicit |
*CONTACT DAMPING | Define viscous damping between contacting surfaces. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONTACT EXCLUSIONS | Specify self-contact surfaces or surface pairings to exclude from the general contact domain. | Interaction module | ABAQUS/Explicit |
*CONTACT FILE | Define results file requests for contact variables. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Standard |
*CONTACT FORMULATION | Specify a nondefault contact formulation for the general contact algorithm. | Interaction module | ABAQUS/Explicit |
*CONTACT INCLUSIONS | Specify self-contact surfaces or surface pairings to include in the general contact domain. | Interaction module | ABAQUS/Explicit |
*CONTACT INTERFERENCE | Prescribe time-dependent allowable interferences of contact pairs and contact elements. | Interaction module | ABAQUS/Standard |
*CONTACT OUTPUT | Specify contact variables to be written to the output database. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*CONTACT PAIR | Define surfaces that contact each other. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CONTACT PRINT | Define print requests for contact variables. | Unsupported | ABAQUS/Standard |
*CONTACT PROPERTY ASSIGNMENT | Assign contact properties for the general contact algorithm. | Interaction module | ABAQUS/Explicit |
*CONTACT RESPONSE | Define contact responses for design sensitivity analysis. | Unsupported | ABAQUS/Design |
*CONTOUR INTEGRAL | Provide contour integral estimates. | Interaction module | ABAQUS/Standard |
*CONTROLS | Reset solution controls. | Step module | ABAQUS/Standard |
*CORRELATION | Define cross-correlation properties for random response loading. | Unsupported | ABAQUS/Standard |
*CO-SIMULATION | Identify the external program for co-simulation with ABAQUS. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*CO-SIMULATION REGION | Identify the interface regions in the ABAQUS model and select the solution quantities to be exchanged with the external program. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*COUPLED TEMPERATURE-DISPLACEMENT | Fully coupled, simultaneous heat transfer and stress analysis. | Step module | ABAQUS/Standard |
*COUPLED THERMAL-ELECTRICAL | Fully coupled, simultaneous heat transfer and electrical analysis. | Step module | ABAQUS/Standard |
*COUPLING | Define a surface-based coupling constraint. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CRADIATE | Specify radiation conditions and associated sink temperatures at one or more nodes or vertices. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*CREEP | Define a creep law. | Property module | ABAQUS/Standard |
*CREEP STRAIN RATE CONTROL | Control loadings based on the maximum equivalent creep strain rate. | Unsupported | ABAQUS/Standard |
*CRUSHABLE FOAM | Specify the crushable foam plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CRUSHABLE FOAM HARDENING | Specify hardening for the crushable foam plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CYCLED PLASTIC | Specify cycled yield stress data for the *ORNL model. | Property module | ABAQUS/Standard |
*CYCLIC | Define cyclic symmetry for a cavity radiation heat transfer analysis. | Unsupported | ABAQUS/Standard |
*CYCLIC HARDENING | Specify the size of the elastic range for the combined hardening model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*CYCLIC SYMMETRY MODEL | Define the number of sectors and the axis of symmetry for a cyclic symmetric structure. | Unsupported | ABAQUS/Standard |
*D ADDED MASS | Specify distributed added mass in a *FREQUENCY step. | Unsupported | ABAQUS/Aqua |
*DAMAGE EVOLUTION | Specify material properties to define the evolution of damage. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*DAMAGE INITIATION | Specify material properties to define the initiation of damage. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*DAMPING | Specify material damping. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*DASHPOT | Define dashpot behavior. | Property module and Interaction module; supported only for linear behavior independent of field variables. For nonlinear behavior or to include field variables, use connectors in the Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*DEBOND | Activate crack propagation capability and specify debonding amplitude curve. | Unsupported | ABAQUS/Standard |
*DECHARGE | Input distributed electric charges for piezoelectric analysis. | Load module | ABAQUS/Standard |
*DECURRENT | Specify distributed current densities in an electric conduction analysis. | Load module | ABAQUS/Standard |
*DEFORMATION PLASTICITY | Specify the deformation plasticity model. | Property module | ABAQUS/Standard |
*DENSITY | Specify material mass density. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*DEPVAR | Specify solution-dependent state variables. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*DESIGN GRADIENT | Directly specify design gradients for design sensitivity analysis. | Unsupported | ABAQUS/Design |
*DESIGN PARAMETER | Specify design parameters with respect to which sensitivities are calculated. | Unsupported | ABAQUS/Design |
*DESIGN RESPONSE | Specify responses for design sensitivity analysis. | Unsupported | ABAQUS/Design |
*DETONATION POINT | Define detonation points for a JWL explosive equation of state. | Property module | ABAQUS/Explicit |
*DFLOW | Specify distributed seepage flows for consolidation analysis. | Unsupported; similar functionality is available in the Load module. | ABAQUS/Standard |
*DFLUX | Specify distributed fluxes in heat transfer or mass diffusion analyses. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*DIAGNOSTICS | Control diagnostic messages. | Unsupported | ABAQUS/Explicit |
*DIELECTRIC | Specify dielectric material properties. | Property module | ABAQUS/Standard |
*DIFFUSIVITY | Specify mass diffusivity. | Property module | ABAQUS/Standard |
*DIRECT CYCLIC | Obtain the stabilized cyclic response of a structure directly. | Unsupported | ABAQUS/Standard |
*DISPLAY BODY | Define a part instance that will be used for display only. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*DISTRIBUTION | Define spatial distributions. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*DISTRIBUTING | Define a distributing coupling constraint. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*DISTRIBUTING COUPLING | Specify nodes and weighting for distributing coupling elements. | Unsupported; this option has been superseded by the *COUPLING and *DISTRIBUTING options. | ABAQUS/Standard |
*DLOAD | Specify distributed loads. | Load module | ABAQUS/Standard ABAQUS/Explicit ABAQUS/Aqua |
*DRAG CHAIN | Specify parameters for drag chain elements. | Unsupported | ABAQUS/Standard |
*DRUCKER PRAGER | Specify the extended Drucker-Prager plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*DRUCKER PRAGER CREEP | Specify a Drucker-Prager creep law and material properties. | Property module | ABAQUS/Standard |
*DRUCKER PRAGER HARDENING | Specify hardening for Drucker-Prager plasticity models. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*DSA CONTROLS | Set DSA solution controls. | Unsupported | ABAQUS/Design |
*DSECHARGE | Input distributed electric surface charges for piezoelectric analysis. | Load module | ABAQUS/Standard |
*DSECURRENT | Specify distributed current densities over a surface in an electric conduction analysis. | Load module | ABAQUS/Standard |
*DSFLOW | Specify distributed seepage flows normal to a surface. | Load module | ABAQUS/Standard |
*DSFLUX | Specify distributed surface fluxes for heat transfer analysis. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*DSLOAD | Specify distributed surface loads. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*DYNAMIC | Dynamic stress/displacement analysis. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*DYNAMIC TEMPERATURE-DISPLACEMENT | Dynamic coupled thermal-stress analysis using explicit integration. | Step module | ABAQUS/Explicit |
*EL FILE | Define results file requests for element variables. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Standard ABAQUS/Explicit |
*EL PRINT | Define data file requests for element variables. | Unsupported | ABAQUS/Standard |
*ELASTIC | Specify elastic material properties. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*ELCOPY | Create elements by copying from an existing element set. | Not applicable; copying portions of sketches and instancing of parts serve similar purposes. | ABAQUS/Standard ABAQUS/Explicit |
*ELECTRICAL CONDUCTIVITY | Specify electrical conductivity. | Property module | ABAQUS/Standard |
*ELEMENT | Define elements by giving their nodes. | Mesh module | ABAQUS/Standard ABAQUS/Explicit |
*ELEMENT MATRIX OUTPUT | Write element stiffness matrices and mass matrices to a file. | Unsupported | ABAQUS/Standard |
*ELEMENT OUTPUT | Define output database requests for element variables. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*ELEMENT PROPERTIES | Modify element properties on an element-by-element basis. | Unsupported | ABAQUS/Standard |
*ELEMENT RESPONSE | Define element responses for design sensitivity analysis. | Unsupported | ABAQUS/Design |
*ELGEN | Incremental element generation. | Not applicable; elements are generated when you mesh the model. | ABAQUS/Standard ABAQUS/Explicit |
*ELSET | Assign elements to an element set. | Set toolset | ABAQUS/Standard ABAQUS/Explicit |
*EMBEDDED ELEMENT | Specify an element or a group of elements that lie embedded in a group of “host” elements in a model. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*EMISSIVITY | Specify surface emissivity. | Unsupported | ABAQUS/Standard |
*END ASSEMBLY | End the definition of an assembly. | Assembly module | ABAQUS/Standard ABAQUS/Explicit |
*END INSTANCE | End the definition of an instance. | Assembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis | ABAQUS/Standard ABAQUS/Explicit |
*END LOAD CASE | End the definition of a load case for multiple load case analysis. | Load module | ABAQUS/Standard |
*END PART | End the definition of a part. | Part module | ABAQUS/Standard ABAQUS/Explicit |
*END STEP | End the definition of a step. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*ENERGY FILE | Write energy output to the results file. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Standard ABAQUS/Explicit |
*ENERGY OUTPUT | Define output database requests for whole model or element set energy data. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*ENERGY PRINT | Print a summary of the total energies. | Unsupported | ABAQUS/Standard |
*EOS | Specify an equation of state model. | Property module | ABAQUS/Explicit |
*EOS COMPACTION | Specify plastic compaction behavior for an equation of state model. | Property module | ABAQUS/Explicit |
*EOS SHEAR | Specify shear behavior for an equation of state material. | Property module | ABAQUS/Explicit |
*EPJOINT | Define properties for elastic-plastic joint elements. | Unsupported | ABAQUS/Standard |
*EQUATION | Define linear multi-point constraints. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*EXPANSION | Specify thermal expansion. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*EXTREME ELEMENT VALUE | Define element variables to be monitored. | Unsupported | ABAQUS/Explicit |
*EXTREME NODE VALUE | Define nodal variables to be monitored. | Unsupported | ABAQUS/Explicit |
*EXTREME VALUE | Define element and nodal variables to be monitored. | Unsupported | ABAQUS/Explicit |
*FAIL STRAIN | Define parameters for strain-based failure measures. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*FAIL STRESS | Define parameters for stress-based failure measures. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*FAILURE RATIOS | Define the shape of the failure surface for a *CONCRETE model. | Property module | ABAQUS/Standard |
*FASTENER | Define mesh-independent fasteners. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FASTENER PROPERTY | Prescribe mesh-independent fastener properties. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FIELD | Specify predefined field variable values. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FILE FORMAT | Specify format for results file output and invoke zero-increment results file output. | Unsupported; ABAQUS/CAE does not use the results file. | ABAQUS/Standard |
*FILE OUTPUT | Define output written to the results file. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Explicit |
*FILM | Define film coefficients and associated sink temperatures. | Unsupported; similar functionality is available in the Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*FILM PROPERTY | Define a film coefficient as a function of temperature and field variables. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*FILTER | Define a filter for output filtering. | Filter toolset | ABAQUS/Explicit |
*FIXED MASS SCALING | Specify mass scaling at the beginning of the step. | Step module | ABAQUS/Explicit |
*FLOW | Define seepage coefficients and associated sink pore pressures. | Unsupported | ABAQUS/Standard |
*FLUID BEHAVIOR | Define fluid behavior for a fluid cavity. | Unsupported | ABAQUS/Explicit |
*FLUID BULK MODULUS | Define compressibility for a hydraulic fluid. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FLUID CAVITY | Define a fluid cavity. | Unsupported | ABAQUS/Explicit |
*FLUID DENSITY | Specify hydrostatic fluid density. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FLUID EXCHANGE | Define fluid exchange. | Unsupported | ABAQUS/Explicit |
*FLUID EXCHANGE ACTIVATION | Activate fluid exchange definitions. | Unsupported | ABAQUS/Explicit |
*FLUID EXCHANGE PROPERTY | Define the fluid exchange property for flow in or out of a fluid cavity. | Unsupported | ABAQUS/Explicit |
*FLUID EXPANSION | Specify the thermal expansion coefficient for a hydraulic fluid. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FLUID FLUX | Change the amount of fluid in a fluid-filled cavity. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FLUID INFLATOR | Define a fluid inflator. | Unsupported | ABAQUS/Explicit |
*FLUID INFLATOR ACTIVATION | Activate fluid inflator definitions. | Unsupported | ABAQUS/Explicit |
*FLUID INFLATOR MIXTURE | Define gas species used for a fluid inflator. | Unsupported | ABAQUS/Explicit |
*FLUID INFLATOR PROPERTY | Define a fluid inflator property. | Unsupported | ABAQUS/Explicit |
*FLUID LEAKOFF | Define fluid leak-off coefficients for pore pressure cohesive elements. | Property module | ABAQUS/Standard |
*FLUID LINK | Define properties for fluid link elements. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FLUID PROPERTY | Define properties for hydrostatic fluid elements. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*FOUNDATION | Prescribe element foundations. | Interaction module | ABAQUS/Standard |
*FRACTURE CRITERION | Specify crack propagation criteria. | Unsupported | ABAQUS/Standard |
*FRAME SECTION | Specify a frame section. | Unsupported | ABAQUS/Standard |
*FREQUENCY | Extract natural frequencies and modal vectors. | Step module | ABAQUS/Standard |
*FRICTION | Specify a friction model. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*GAP | Specify clearance and local geometry for GAP-type elements. | Unsupported; similar functionality is available using connectors. | ABAQUS/Standard |
*GAP CONDUCTANCE | Introduce heat conductance between interface surfaces. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*GAP ELECTRICAL CONDUCTANCE | Specify electrical conductance between surfaces. | Unsupported | ABAQUS/Standard |
*GAP FLOW | Define constitutive parameters for tangential flow in pore pressure cohesive elements. | Property module | ABAQUS/Standard |
*GAP HEAT GENERATION | Introduce heat generation due to energy dissipation at the interface. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*GAP RADIATION | Introduce heat radiation between surfaces. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*GASKET BEHAVIOR | Begin the specification of a gasket behavior. | Property module | ABAQUS/Standard |
*GASKET CONTACT AREA | Specify a gasket contact area or contact width for average pressure output. | Property module | ABAQUS/Standard |
*GASKET ELASTICITY | Specify elastic properties for the membrane and transverse shear behaviors of a gasket. | Property module | ABAQUS/Standard |
*GASKET SECTION | Specify element properties for gasket elements. | Property module | ABAQUS/Standard |
*GASKET THICKNESS BEHAVIOR | Specify a gasket thickness-direction behavior. | Property module | ABAQUS/Standard |
*GEL | Define a swelling gel. | Property module | ABAQUS/Standard |
*GEOSTATIC | Obtain a geostatic stress field. | Step module | ABAQUS/Standard |
*HEADING | Print a heading on the output. | Job module | ABAQUS/Standard ABAQUS/Explicit |
*HEAT GENERATION | Include volumetric heat generation in heat transfer analyses. | Property module | ABAQUS/Standard |
*HEAT TRANSFER | Transient or steady-state uncoupled heat transfer analysis. | Step module | ABAQUS/Standard |
*HEATCAP | Specify a point capacitance. | Property module and Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*HOURGLASS STIFFNESS | Specify nondefault hourglass stiffness. | Mesh module | ABAQUS/Standard |
*HYPERELASTIC | Specify elastic properties for approximately incompressible elastomers. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*HYPERFOAM | Specify elastic properties for a hyperelastic foam. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*HYPOELASTIC | Specify hypoelastic material properties. | Property module | ABAQUS/Standard |
*HYSTERESIS | Specify a rate-dependent elastomer model. | Property module | ABAQUS/Standard |
*IMPEDANCE | Define impedances for acoustic analysis. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*IMPEDANCE PROPERTY | Define the impedance parameters for an acoustic medium boundary. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*IMPERFECTION | Introduce geometric imperfections for postbuckling analysis. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*IMPORT | Import information from a previous ABAQUS/Explicit or ABAQUS/Standard analysis. | Supported for use in conjunction with *INSTANCE; importing selected part instances stored in an output database is supported using the File menu and importing the initial state of part instances is supported in the Load module. | ABAQUS/Standard ABAQUS/Explicit |
*IMPORT CONTROLS | Specify tolerances used in importing model and results data. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*IMPORT ELSET | Import element set definitions from a previous ABAQUS/Explicit or ABAQUS/Standard analysis. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*IMPORT NSET | Import node set definitions from a previous ABAQUS/Explicit or ABAQUS/Standard analysis. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*INCIDENT WAVE | Define incident wave loading for a blast or scattering load on a boundary. | Unsupported; this option has been superseded by the *INCIDENT WAVE INTERACTION option. | ABAQUS/Standard ABAQUS/Explicit |
*INCIDENT WAVE FLUID PROPERTY | Define the fluid properties associated with an incident wave. | Unsupported; this option has been superseded by the *INCIDENT WAVE INTERACTION PROPERTY option. | ABAQUS/Standard ABAQUS/Explicit |
*INCIDENT WAVE INTERACTION | Define incident wave loading for a blast or scattering load on a surface. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*INCIDENT WAVE INTERACTION PROPERTY | Define the geometric data and fluid properties describing an incident wave. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*INCIDENT WAVE PROPERTY | Define the geometric data describing an incident wave. | Unsupported; this option has been superseded by the *INCIDENT WAVE INTERACTION PROPERTY option. | ABAQUS/Standard ABAQUS/Explicit |
*INCIDENT WAVE REFLECTION | Define the reflection load on a surface caused by incident wave fields. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*INCLUDE | Reference an external file containing ABAQUS input data. | Several input data options in ABAQUS/CAE provide the capability to reference external files; for example, the material editor can read material properties from an ASCII file. | ABAQUS/Standard ABAQUS/Explicit |
*INCREMENTATION OUTPUT | Define output database requests for time incrementation data. | Step module | ABAQUS/Explicit |
*INELASTIC HEAT FRACTION | Define the fraction of the rate of inelastic dissipation that appears as a heat source. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*INERTIA RELIEF | Apply inertia-based load balancing. | Load module | ABAQUS/Standard |
*INITIAL CONDITIONS | Specify initial conditions for the model. | Load module | ABAQUS/Standard ABAQUS/Explicit ABAQUS/Aqua |
*INSTANCE | Begin an instance definition. | Assembly module for part instances not imported from a previous analysis; Load module for part instances imported from a previous analysis | ABAQUS/Standard ABAQUS/Explicit |
*INTEGRATED OUTPUT | Specify variables integrated over a surface to be written to the output database. | Step module | ABAQUS/Explicit |
*INTEGRATED OUTPUT SECTION | Define an integrated output section over a surface with a local coordinate system and a reference point. | Step module | ABAQUS/Explicit |
*INTERACTION OUTPUT | Specify spot weld interaction variables to be written to the output database. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*INTERACTION PRINT | Define print requests for spot weld interaction variables. | Unsupported | ABAQUS/Standard |
*INTERFACE | Define properties for contact elements. | Property module; supported for two-dimensional, three-dimensional, and axisymmetric acoustic interface elements. Contact elements are not supported. | ABAQUS/Standard |
*ITS | Define properties for ITS elements. | Unsupported; similar functionality (with the exception of friction) is available using connectors. | ABAQUS/Standard |
*JOINT | Define properties for JOINTC elements. | Unsupported; similar functionality is available using connectors. | ABAQUS/Standard |
*JOINT ELASTICITY | Specify elastic properties for elastic-plastic joint elements. | Unsupported | ABAQUS/Standard |
*JOINT PLASTICITY | Specify plastic properties for elastic-plastic joint elements. | Unsupported | ABAQUS/Standard |
*JOINTED MATERIAL | Specify the jointed material model. | Unsupported | ABAQUS/Standard |
*JOULE HEAT FRACTION | Define the fraction of electric energy released as heat. | Property module | ABAQUS/Standard |
*KAPPA | Specify the material parameters and for mass diffusion driven by gradients of temperature and equivalent pressure stress, respectively. | Property module | ABAQUS/Standard |
*KINEMATIC | Define a kinematic coupling constraint. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*KINEMATIC COUPLING | Constrain all or specific degrees of freedom of a set of nodes to the rigid body motion of a reference node. | Unsupported; this option has been superseded by the *COUPLING and *KINEMATIC options. | ABAQUS/Standard |
*LATENT HEAT | Specify latent heats. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*LOAD CASE | Begin a load case definition for multiple load case analysis. | Load module | ABAQUS/Standard |
*MAP SOLUTION | Map a solution from an old mesh to a new mesh. | Unsupported | ABAQUS/Standard |
*MASS | Specify a point mass. | Property module and Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*MASS DIFFUSION | Transient or steady-state uncoupled mass diffusion analysis. | Step module | ABAQUS/Standard |
*MASS FLOW RATE | Specify fluid mass flow rate in a heat transfer analysis. | Unsupported | ABAQUS/Standard |
*MATERIAL | Begin the definition of a material. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*MATRIX | Read in the stiffness or mass matrix for a linear user element. | Unsupported | ABAQUS/Standard |
*MATRIX ASSEMBLE | Define stiffness or mass matrices for a part of the model. | Unsupported | ABAQUS/Standard |
*MATRIX INPUT | Read in a matrix for a part of the model. | Unsupported | ABAQUS/Standard |
*MEMBRANE SECTION | Specify section properties for membrane elements. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*MODAL DAMPING | Specify damping for modal dynamic analysis. | Step module | ABAQUS/Standard |
*MODAL DYNAMIC | Dynamic time history analysis using modal superposition. | Step module | ABAQUS/Standard |
*MODAL FILE | Write generalized coordinate (modal amplitude) data or eigendata to the results file during a mode-based dynamic or eigenvalue extraction procedure. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Standard |
*MODAL OUTPUT | Write generalized coordinate (modal amplitude) data to the output database during a mode-based dynamic or complex eigenvalue extraction procedure. | Step module | ABAQUS/Standard |
*MODAL PRINT | Print generalized coordinate (modal amplitude) data during a mode-based dynamic procedure. | Unsupported | ABAQUS/Standard |
*MODEL CHANGE | Remove or reactivate elements and contact pairs. | You can delete and deactivate contact pairs in the Interaction module; reactivated contact pairs can be imported into ABAQUS/CAE only if the contact pairs were deactivated in the first analysis step. The removal and reactivation of elements is not supported in ABAQUS/CAE. | ABAQUS/Standard |
*MOHR COULOMB | Specify the Mohr-Coulomb plasticity model. | Property module | ABAQUS/Standard |
*MOHR COULOMB HARDENING | Specify hardening for the Mohr-Coulomb plasticity model. | Property module | ABAQUS/Standard |
*MOISTURE SWELLING | Define moisture-driven swelling. | Property module | ABAQUS/Standard |
*MOLECULAR WEIGHT | Define the molecular weight of an ideal gas species. | Unsupported | ABAQUS/Explicit |
*MONITOR | Define a degree of freedom to monitor. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*MOTION | Specify motions as a predefined field. | Unsupported | ABAQUS/Standard |
*MPC | Define multi-point constraints. | Unsupported; most MPCs can be modeled using connectors, tie constraints, or coupling constraints. | ABAQUS/Standard ABAQUS/Explicit |
*MULLINS EFFECT | Specify Mullins effect material parameters for elastomers. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*M1 | Define the first bending moment behavior of beams. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*M2 | Define the second bending moment behavior of beams. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*NCOPY | Create nodes by copying. | Not applicable; copying portions of sketches and instancing of parts serve similar purposes. | ABAQUS/Standard ABAQUS/Explicit |
*NFILL | Fill in nodes in a region. | Not applicable; nodes are generated when you mesh the model. | ABAQUS/Standard ABAQUS/Explicit |
*NGEN | Generate incremental nodes. | Not applicable; nodes are generated when you mesh the model. | ABAQUS/Standard ABAQUS/Explicit |
*NMAP | Map nodes from one coordinate system to another. | Unsupported; meshing techniques in the Mesh module are usually preferable. | ABAQUS/Standard ABAQUS/Explicit |
*NO COMPRESSION | Introduce a compressive failure theory (tension only materials). | Property module | ABAQUS/Standard |
*NO TENSION | Introduce a tension failure theory (compression only material). | Property module | ABAQUS/Standard |
*NODAL THICKNESS | Define shell or membrane thickness at nodes. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*NODE | Specify nodal coordinates. | Mesh module | ABAQUS/Standard ABAQUS/Explicit |
*NODE FILE | Define results file requests for nodal data. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Standard ABAQUS/Explicit |
*NODE OUTPUT | Define output database requests for nodal data. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*NODE PRINT | Define print requests for nodal variables. | Unsupported | ABAQUS/Standard |
*NODE RESPONSE | Define nodal responses for design sensitivity analysis. | Unsupported | ABAQUS/Design |
*NONSTRUCTURAL MASS | Specify mass contribution to the model from nonstructural features. | Property module and Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*NORMAL | Specify a particular normal direction. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*NSET | Assign nodes to a node set. | Set toolset | ABAQUS/Standard ABAQUS/Explicit |
*ORIENTATION | Define a local axis system for material or element property definition, for kinematic coupling constraints, for free directions for inertia relief loads, or for connectors. | Property module, Interaction module, and Load module | ABAQUS/Standard ABAQUS/Explicit |
*ORNL | Specify constitutive model developed by Oak Ridge National Laboratory. | Property module | ABAQUS/Standard |
*OUTPUT | Define output requests to the output database. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*PARAMETER | Define parameters for input parametrization. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*PARAMETER DEPENDENCE | Define dependence table for tabularly dependent parameters. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*PARAMETER SHAPE VARIATION | Define parametric shape variations. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*PART | Begin a part definition. | Part module | ABAQUS/Standard ABAQUS/Explicit |
*PERIODIC | Define periodic symmetry for a cavity radiation heat transfer analysis. | Unsupported | ABAQUS/Standard |
*PERMEABILITY | Define permeability for pore fluid flow. | Property module | ABAQUS/Standard |
*PHYSICAL CONSTANTS | Specify physical constants. | Model attribute | ABAQUS/Standard ABAQUS/Explicit |
*PIEZOELECTRIC | Specify piezoelectric material properties. | Property module | ABAQUS/Standard |
*PIPE-SOIL INTERACTION | Specify element properties for pipe-soil interaction elements. | Unsupported | ABAQUS/Standard |
*PIPE-SOIL STIFFNESS | Define constitutive behavior for pipe-soil interaction elements. | Unsupported | ABAQUS/Standard |
*PLANAR TEST DATA | Used to provide planar test (or pure shear) data (compression and/or tension). | Property module | ABAQUS/Standard ABAQUS/Explicit |
*PLASTIC | Specify a metal plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*PLASTIC AXIAL | Define plastic axial force for frame elements. | Unsupported | ABAQUS/Standard |
*PLASTIC M1 | Define the first plastic bending moment behavior for frame elements. | Unsupported | ABAQUS/Standard |
*PLASTIC M2 | Define the second plastic bending moment behavior for frame elements. | Unsupported | ABAQUS/Standard |
*PLASTIC TORQUE | Define the plastic torsional moment behavior for frame elements. | Unsupported | ABAQUS/Standard |
*POROUS BULK MODULI | Define bulk moduli for soils and rocks. | Property module | ABAQUS/Standard |
*POROUS ELASTIC | Specify elastic material properties for porous materials. | Property module | ABAQUS/Standard |
*POROUS FAILURE CRITERIA | Define porous material failure criteria for a *POROUS METAL PLASTICITY model. | Property module | ABAQUS/Explicit |
*POROUS METAL PLASTICITY | Specify a porous metal plasticity model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*POST OUTPUT | Postprocess for output from the restart file. | Unsupported | ABAQUS/Standard |
*POTENTIAL | Define an anisotropic yield/creep model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*PREPRINT | Select printout for the analysis input file processor. | Job module | ABAQUS/Standard ABAQUS/Explicit |
*PRESSURE PENETRATION | Specify pressure penetration loads with surface-based contact. | Unsupported | ABAQUS/Standard |
*PRESSURE STRESS | Specify equivalent pressure stress as a predefined field for a mass diffusion analysis. | Unsupported | ABAQUS/Standard |
*PRESTRESS HOLD | Keep rebar prestress constant during initial equilibrium solution. | Unsupported | ABAQUS/Standard |
*PRE-TENSION SECTION | Associate a pre-tension node with a pre-tension section. | Load module | ABAQUS/Standard |
*PRINT | Request or suppress output to the message file in an ABAQUS/Standard analysis or to the status file in an ABAQUS/Explicit analysis. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*PSD-DEFINITION | Define a cross-spectral density frequency function for random response loading. | Unsupported | ABAQUS/Standard |
*RADIATE | Specify radiation conditions in heat transfer analyses. | Unsupported; similar functionality is available in the Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*RADIATION FILE | Define results file requests for cavity radiation heat transfer. | Unsupported; ABAQUS/CAE reads output from the output database file only. | ABAQUS/Standard |
*RADIATION OUTPUT | Define output database requests for cavity radiation variables. | Step module | ABAQUS/Standard |
*RADIATION PRINT | Define print requests for cavity radiation heat transfer. | Unsupported | ABAQUS/Standard |
*RADIATION SYMMETRY | Define cavity symmetries for radiation heat transfer analysis. | Unsupported | ABAQUS/Standard |
*RADIATION VIEWFACTOR | Control cavity radiation and viewfactor calculations. | Unsupported | ABAQUS/Standard |
*RANDOM RESPONSE | Calculate response to random loading. | Step module | ABAQUS/Standard |
*RATE DEPENDENT | Define a rate-dependent viscoplastic model. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*RATIOS | Define anisotropic swelling. | Property module | ABAQUS/Standard |
*REBAR | Define rebar as an element property. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*REBAR LAYER | Define layers of reinforcement in membrane, shell, surface, and continuum elements. | Property module; supported only for membrane and shell elements. | ABAQUS/Standard ABAQUS/Explicit |
*REFLECTION | Define reflection symmetries for a cavity radiation heat transfer analysis. | Unsupported | ABAQUS/Standard |
*RELEASE | Release rotational degrees of freedom at one or both ends of a beam element. | Unsupported | ABAQUS/Standard |
*RESPONSE SPECTRUM | Calculate the response based on user-supplied response spectra. | Step module | ABAQUS/Standard |
*RESTART | Save and reuse data and analysis results. | Step module for saving restart data; Job module for performing a restart analysis | ABAQUS/Standard ABAQUS/Explicit |
*RETAINED EIGENMODES | Select the modes to be retained in a substructure generation analysis. | Unsupported | ABAQUS/Standard |
*RETAINED NODAL DOFS | Specify the degrees of freedom that are to be retained as external to a substructure. | Unsupported | ABAQUS/Standard |
*RIGID BODY | Define a set of elements as a rigid body and define rigid element properties. | Part module and Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*RIGID SURFACE | Define an analytical rigid surface. | Part module | ABAQUS/Standard |
*ROTARY INERTIA | Define rigid body rotary inertia. | Property module and Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*SECTION CONTROLS | Specify section controls. | Mesh module | ABAQUS/Standard ABAQUS/Explicit |
*SECTION FILE | Define results file requests of accumulated quantities on user-defined surface sections. | Unsupported | ABAQUS/Standard |
*SECTION ORIGIN | Define a meshed cross-section origin. | Unsupported | ABAQUS/Standard |
*SECTION POINTS | Locate points in the beam section for which stress and strain output are required. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SECTION PRINT | Define print requests of accumulated quantities on user-defined surface sections. | Unsupported | ABAQUS/Standard |
*SELECT CYCLIC SYMMETRY MODES | Specify the cyclic symmetry modes in an eigenvalue analysis of a cyclic symmetric structure. | Unsupported | ABAQUS/Standard |
*SELECT EIGENMODES | Select the modes to be used in a modal dynamic analysis. | Unsupported | ABAQUS/Standard |
*SFILM | Define film coefficients and associated sink temperatures over a surface for heat transfer analysis. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*SFLOW | Define seepage coefficients and associated sink pore pressures normal to a surface. | Unsupported | ABAQUS/Standard |
*SHEAR CENTER | Define the position of the shear center of a beam section. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SHEAR FAILURE | Specify a shear failure model and criterion. | Unsupported | ABAQUS/Explicit |
*SHEAR RETENTION | Define the reduction of the shear modulus associated with crack surfaces in a *CONCRETE model as a function of the tensile strain across the crack. | Property module | ABAQUS/Standard |
*SHEAR TEST DATA | Used to provide shear test data. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SHELL GENERAL SECTION | Define a general, arbitrary, elastic shell section. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SHELL SECTION | Specify a shell cross-section. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SHELL TO SOLID COUPLING | Define a surface-based coupling between a shell edge and a solid face. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*SIMPEDANCE | Define impedances of acoustic surfaces. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*SIMPLE SHEAR TEST DATA | Used to provide simple shear test data. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SLIDE LINE | Specify slide line surfaces on which deformable structures may interact. | Unsupported; the Interaction module uses surface-based contact. | ABAQUS/Standard |
*SLOAD | Apply loads to a substructure. | Unsupported | ABAQUS/Standard |
*SOILS | Effective stress analysis for fluid-filled porous media. | Step module | ABAQUS/Standard |
*SOLID SECTION | Specify element properties for solid, infinite, acoustic, and truss elements. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SOLUBILITY | Specify solubility. | Property module | ABAQUS/Standard |
*SOLUTION TECHNIQUE | Specify alternative solution methods. | Step module | ABAQUS/Standard |
*SOLVER CONTROLS | Specify controls for the iterative linear solver. | Step module | ABAQUS/Standard |
*SORPTION | Define absorption and exsorption behavior. | Property module | ABAQUS/Standard |
*SPECIFIC HEAT | Define specific heat. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SPECTRUM | Define a response spectrum. | Unsupported | ABAQUS/Standard |
*SPRING | Define spring behavior. | Property module and Interaction module; supported only for linear behavior independent of field variables. For nonlinear behavior or to include field variables, use connectors in the Interaction module. | ABAQUS/Standard ABAQUS/Explicit |
*SRADIATE | Specify surface radiation conditions in heat transfer analysis. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*STATIC | Static stress/displacement analysis. | Step module | ABAQUS/Standard |
*STEADY STATE CRITERIA | Specify steady-state criteria for terminating a quasi-static uni-directional simulation. | Unsupported | ABAQUS/Explicit |
*STEADY STATE DETECTION | Specify steady-state requirements for terminating a quasi-static uni-directional simulation. | Unsupported | ABAQUS/Explicit |
*STEADY STATE DYNAMICS | Steady-state dynamic response based on harmonic excitation. | Step module | ABAQUS/Standard |
*STEADY STATE TRANSPORT | Steady-state transport analysis. | Unsupported | ABAQUS/Standard |
*STEP | Begin a step. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*SUBMODEL | Specify driven boundary nodes in submodeling analysis. | Load module and model attribute | ABAQUS/Standard ABAQUS/Explicit |
*SUBSTRUCTURE COPY | Copy a substructure definition. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE DELETE | Remove a substructure from the substructure library. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE DIRECTORY | List information about the substructures on a substructure library. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE GENERATE | Substructure generation analysis. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE LOAD CASE | Begin the definition of a substructure load case. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE MATRIX OUTPUT | Write a substructure's recovery matrix, reduced stiffness matrix, mass matrix, load case vectors, and gravity load vectors to a file. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE PATH | Enter into a substructure to obtain output or return back from a previously entered substructure. | Unsupported | ABAQUS/Standard |
*SUBSTRUCTURE PROPERTY | Translate, rotate, and/or reflect substructures. | Unsupported | ABAQUS/Standard |
*SURFACE | Define a surface or region in a model. | Element-based surfaces are supported by the Surface toolset. Node-based surfaces are not supported; if node-based surfaces are imported into ABAQUS/CAE, they are treated as sets. | ABAQUS/Standard ABAQUS/Explicit |
*SURFACE BEHAVIOR | Define alternative pressure-overclosure relationships for contact. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*SURFACE FLAW | Define geometry of surface flaws. | Unsupported | ABAQUS/Standard |
*SURFACE INTERACTION | Define surface interaction properties. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*SURFACE PROPERTY | Define surface properties for cavity radiation. | Unsupported | ABAQUS/Standard |
*SURFACE PROPERTY ASSIGNMENT | Assign surface properties to a surface for the general contact algorithm. | Interaction module | ABAQUS/Explicit |
*SURFACE SECTION | Specify section properties for surface elements. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*SWELLING | Specify time-dependent volumetric swelling. | Property module | ABAQUS/Standard |
*SYMMETRIC MODEL GENERATION | Create a three-dimensional model from an axisymmetric or partial three-dimensional model. | Unsupported | ABAQUS/Standard |
*SYMMETRIC RESULTS TRANSFER | Import results from an axisymmetric or partial three-dimensional analysis. | Unsupported | ABAQUS/Standard |
*SYSTEM | Specify a local coordinate system in which to define nodes. | Not applicable; instancing a part in the Assembly module creates a local coordinate system. | ABAQUS/Standard ABAQUS/Explicit |
*TEMPERATURE | Specify temperature as a predefined field. | Load module | ABAQUS/Standard ABAQUS/Explicit |
*TENSILE FAILURE | Specify a tensile failure model and criterion. | Unsupported | ABAQUS/Explicit |
*TENSION STIFFENING | Define the retained tensile stress normal to a crack in a *CONCRETE model. | Property module | ABAQUS/Standard |
*THERMAL EXPANSION | Define the thermal expansion behavior of beams. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*TIE | Define surface-based tie and cyclic symmetry constraints or coupled acoustic-structural interactions. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*TIME POINTS | Specify time points at which data are written to the output database or restart files, or specify time points in the loading history at which the response of a structure will be evaluated in a direct cyclic analysis. | Step module | ABAQUS/Standard ABAQUS/Explicit |
*TORQUE | Define the torsional behavior of beams. | Unsupported | ABAQUS/Standard ABAQUS/Explicit |
*TORQUE PRINT | Print a summary of the total torque that can be transmitted across axisymmetric slide lines. | Unsupported | ABAQUS/Standard |
*TRACER PARTICLE | Define tracer particles for tracking the location of and results at material points during a step. | Unsupported | ABAQUS/Explicit |
*TRANSFORM | Specify a local coordinate system at nodes. | Define nodal coordinate systems for prescribed conditions in the Load module. | ABAQUS/Standard ABAQUS/Explicit |
*TRANSPORT VELOCITY | Specify angular transport velocity. | Unsupported | ABAQUS/Standard |
*TRANSVERSE SHEAR STIFFNESS | Define transverse shear stiffness for beams and shells. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*TRIAXIAL TEST DATA | Provide triaxial test data. | Property module | ABAQUS/Standard |
*TRS | Used to define temperature-time shift for time history viscoelastic analysis. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*UEL PROPERTY | Define property values to be used with a user element type. | Actuator/sensor interaction properties can be defined in the Interaction module. | ABAQUS/Standard |
*UNDEX CHARGE PROPERTY | Define an UNDEX charge for incident waves. | Interaction module | ABAQUS/Standard ABAQUS/Explicit |
*UNIAXIAL TEST DATA | Used to provide uniaxial test data (compression and/or tension). | Property module | ABAQUS/Standard ABAQUS/Explicit |
*USER DEFINED FIELD | Redefine field variables at a material point. | Property module | ABAQUS/Standard |
*USER ELEMENT | Introduce a user-defined element type. | Actuator/sensor interactions can be defined in the Interaction module. | ABAQUS/Standard |
*USER MATERIAL | Define material constants for use in subroutine UMAT, UMATHT, or VUMAT. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*USER OUTPUT VARIABLES | Specify number of user variables. | Property module | ABAQUS/Standard |
*VARIABLE MASS SCALING | Specify mass scaling during the step. | Step module | ABAQUS/Explicit |
*VIEWFACTOR OUTPUT | Write radiation viewfactors to the results file in cavity radiation heat transfer analysis. | Unsupported | ABAQUS/Standard |
*VISCO | Transient, static, stress/displacement analysis with time-dependent material response (creep, swelling, and viscoelasticity). | Step module | ABAQUS/Standard |
*VISCOELASTIC | Specify dissipative behavior for use with elasticity. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*VISCOUS | Specify viscous material properties for the two-layer viscoplastic model. | Property module | ABAQUS/Standard |
*VOID NUCLEATION | Define the nucleation of voids in a porous material. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*VOLUMETRIC TEST DATA | Provide volumetric test data. | Property module | ABAQUS/Standard ABAQUS/Explicit |
*WAVE | Define gravity waves for use in immersed structure calculations. | Unsupported | ABAQUS/Aqua |
*WIND | Define wind velocity profile for wind loading. | Unsupported | ABAQUS/Aqua |