Product: ABAQUS/Standard
This problem involves the steady-state vibration of a point-loaded spherical shell coupled to an acoustic fluid that fills its interior. It is modeled using axisymmetric shell and acoustic elements. The closed form solution of Stepanishen and Cox (2000) is used for validation of the analysis. The basis of the coupled acoustic-structural vibration capability in ABAQUS is described in Coupled acoustic-structural medium analysis, Section 2.9.1 of the ABAQUS Theory Manual, and Acoustic, shock, and coupled acoustic-structural analysis, Section 6.9.1 of the ABAQUS Analysis User's Manual.
The model is a semicircular shell and fluid mesh of radius 2.286 m. A point load on the symmetry axis of magnitude 1.0 N is applied to the shell. The shells are 0.0254 m in thickness and have a Young's modulus of 206.8 GPa, a Poisson's ratio of 0.3, and a mass density of 7800.0 kg/m3. The acoustic fluid has a density, , of 1000 kg/m3 and a bulk modulus, , of 2.25 GPa. The response of the coupled system is calculated for frequencies ranging from 100 to 1000 Hz in 5 Hz increments. There are two different finite element meshes used: one with explicitly defined acoustic-structural interaction elements and one that uses the *TIE option. The former model consists of 220 SAX1 elements surrounding a mesh of 15848 ACAX4 elements. Coupling is effected using 220 ASI2A elements. The latter model uses 80 SAX2 elements surrounding a mesh of 965 ACAX8 elements. For this mesh, coupling is effected using the *TIE option to generate the acoustic-structural interaction elements internally.
A dummy part is included in the models to ensure that the analytical solution appears in the output database. This part consists of a single point mass, uncoupled from the model described above, with a displacement boundary condition on degree of freedom 1. This imposed displacement uses an amplitude table consisting of the Stepanishen/Cox analytical solution for the drive point admittance.
The response is obtained by conducting a frequency sweep, using the *STEADY STATE DYNAMICS, DIRECT and the mode-based *STEADY STATE DYNAMICS options. A frequency sweep over the range 100.0 to 1000.0 cycles per second, using a linear frequency scale with solution points at intervals of 5 cycles per second throughout this range, is requested.
The finite element solutions for drive point admittance, the ratio of the velocity to the applied load, are shown in Figure 1.10.21. This plot was created in the Visualization module of ABAQUS/CAE by multiplying the steady-state displacement by the frequency and taking the logarithm (base 10) of the data. Comparison to the analytical results of Stepanishen and Cox, as shown, is quite good throughout the frequency range. The analytical data appear as the displacement of degree of freedom 1 for the dummy mass element in the output database. The results obtained in the *STEADY STATE DYNAMICS, DIRECT analysis are nearly identical to the results obtained in the mode-based *STEADY STATE DYNAMICS analysis although only 50 eigenmodes have been retained.
The natural frequencies of the coupled fluid-filled sphere are extracted in a *FREQUENCY step. These frequencies correspond well with frequencies for the peak amplitudes for acoustic pressure and drive point admittance, as seen in Figure 1.10.21. The frequency results in the figure correspond to the *TIE case; the results for the other case are very smiliar.
Figure 1.10.22 shows a sample contour plot of acoustic pressure at 980 Hz.
Coupled analysis using acoustic structural interaction elements.
Coupled analysis using *TIE.