You can define self-contact in any step, including the initial step. Select InteractionCreate from the main menu bar and select the surface. You can define self-contact between an edge of a wire, a face of a solid, or a face of a shell. For a brief overview of self-contact, see Understanding interactions, Section 15.3. For a more detailed discussion, see Defining contact pairs in ABAQUS/Standard, Section 21.2.1 of the ABAQUS Analysis User's Manual and Defining contact pairs in ABAQUS/Explicit, Section 21.4.1 of the ABAQUS Analysis User's Manual.
You can obtain contact data for a specific self-contact interaction by using the output request editors in the Step module. In the Domain section of the editors, select Interaction and the name of the self-contact interaction. For more information, see Creating an output request, Section 14.11.1.
To define self-contact:
From the main menu bar, select InteractionCreate.
Tip: You can also create a self-contact interaction using the tool in the Interaction module toolbox.
In the Create Interaction dialog box that appears, do the following:
Name the interaction. For more information about naming objects, see Using basic dialog box components, Section 3.2.1.
Select the step in which the interaction will be created.
Select the Self-contact type of interaction.
Click Continue to close the Create Interaction dialog box.
Use one of the following methods to select the surface:
Use an existing surface to define the region. On the right side of the prompt area, click Surfaces. Select an existing surface from the Region Selection dialog box that appears, and click Continue.
Note: The default selection method is based on the selection method you most recently employed. To revert to the other method, click Select in Viewport or Surfaces on the right side of the prompt area.
Use the mouse to select a region in the viewport. (For more information, see Selecting objects within the current viewport, Section 6.2.) You must select a region from only one part instance; the region that you select cannot span multiple part instances.
If the model contains a combination of orphan mesh instances and native geometric part instances, click one of the following from the prompt area:
Click Geometry if you want to select the surface from a native geometric part instance.
Click Mesh if you want to select the surface from an orphan mesh instance.
In the Edit Interaction dialog box that appears, do the following:
If you will be performing an ABAQUS/Explicit analysis, choose the mechanical constraint formulation. For more information, see Contact formulation for ABAQUS/Explicit contact pairs, Section 21.4.4 of the ABAQUS Analysis User's Manual.
Select a contact interaction property. If desired, click Create to create the interaction property.
If desired, click the arrow next to the Contact controls field and select the customized contact controls to use for this interaction. The list of contact controls is filtered based on the type of analysis that you are performing; for example, if you are performing an ABAQUS/Standard analysis, only ABAQUS/Standard contact controls that were previously specified will appear in the list. For more information, see Specifying contact controls in an ABAQUS/Standard analysis, Section 15.12.3, and Specifying contact controls in an ABAQUS/Explicit analysis, Section 15.12.4.
Click OK to create the interaction and to close the editor.