6.2.3 Using the angle method to select multiple objects

In complicated models, selecting individual faces or edges from a native part or selecting element faces or nodes from an orphan mesh can be time consuming and prone to error. For example, when creating a surface from an orphan mesh, you must select the individual element faces that make up the surface and append them to your selection. To speed up the selection process, ABAQUS/CAE provides the angle method for selecting multiple faces, edges, elements, element faces, or nodes.

When you are performing a task that allows you to pick more than one face or edge from a native part or more than one element, element face, or node from an orphan mesh, ABAQUS/CAE displays a field in the prompt area. The field allows you to choose between the two selection methods—individually and by angle, as shown in Figure 6–4.

Figure 6–4 Choose the selection method from the field in the prompt area.

The angle method is a two-step process:

In the prompt area you enter an angle (from 0° to 90°).
From the part or assembly you select a face, edge, element face, or node.

If, for example, you want to select a group of faces, you first enter the appropriate angle and select one of the faces. ABAQUS/CAE then selects every adjacent face until the angle between the faces is equal to or exceeds the angle that you entered.

Figure 6–5 illustrates an exhaust manifold represented by an orphan mesh and the effect of the angle method after you select an element on the flange and an angle of 90°.

Figure 6–5 Enter an angle and select an element to select an entire surface.

After you use the angle method, you can click the individually method in the prompt area and [Shift]+Click on individual faces, edges, elements, element faces, or nodes to append them to your selection. You can also [Ctrl]+Click on items to unselect them. In addition, you can continue to use the angle method and use [Shift]+Click to append faces, edges, elements, element faces, or nodes to your selection. You can keep the same angle, or you can change the angle while you continue to append items. For more information, see “Combining selection techniques,” Section 6.2.4.

In the Sketch module, the angle method is available only when you are selecting objects from the underlying part or assembly. When you are selecting edges in the sketch, the chain method replaces the angle method. You use the chain method to select a group of edges that are connected end-to-end, like the links of a chain. For more information on the chain method, see “Using the chain method to select edges in the Sketcher,” Section 19.4.6.

For information on related topics, click any of the following items: