This option is used to write nodal variables to the output database. It must be used in conjunction with the *OUTPUT option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
Set this parameter equal to the name of the node set for which this output request is being made.
This parameter applies only to ABAQUS/Explicit analyses.
Set this parameter equal to the name of the tracer set for which this output request is being made.
Set this parameter equal to the name of the node set for which this output request is being made.
If this parameter is omitted, the output will be written for all the nodes in the model.
This parameter applies only to ABAQUS/Explicit analyses.
Set this parameter equal to the name of the tracer set for which this output request is being made.
This parameter is valid only for displacement output requests.
Set VARIABLE=ALL to indicate that all nodal variables applicable to this procedure and material type should be written to the output database.
Set VARIABLE=PRESELECT to indicate that the default nodal output variables for the current procedure type should be written to the output database. Additional output variables can be requested on the data lines.
If this parameter is omitted, the nodal variables requested for output must be specified on the data lines.
First line:
Specify the identifying keys for the variables to be written to the output database. The keys are defined in “ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the ABAQUS Analysis User's Manual, and “ABAQUS/Explicit output variable identifiers,” Section 4.2.2 of the ABAQUS Analysis User's Manual.
Repeat this data line as often as necessary to define the nodal variables to be written to the output database.