“Upsetting of a cylindrical billet: quasi-static analysis with mesh-to-mesh solution mapping (ABAQUS/Standard) and adaptive meshing (ABAQUS/Explicit),” Section 1.3.1
“Superplastic forming of a rectangular box,” Section 1.3.2
“Stretching of a thin sheet with a hemispherical punch,” Section 1.3.3
“Deep drawing of a cylindrical cup,” Section 1.3.4
“Extrusion of a cylindrical metal bar with frictional heat generation,” Section 1.3.5
“Rolling of thick plates,” Section 1.3.6
“Axisymmetric forming of a circular cup,” Section 1.3.7
“Cup/trough forming,” Section 1.3.8
“Forging with sinusoidal dies,” Section 1.3.9
“Forging with multiple complex dies,” Section 1.3.10
“Flat rolling: transient and steady-state,” Section 1.3.11
“Section rolling,” Section 1.3.12
“Ring rolling,” Section 1.3.13
“Axisymmetric extrusion: transient and steady-state,” Section 1.3.14
“Two-step forming simulation,” Section 1.3.15
“Upsetting of a cylindrical billet: coupled temperature-displacement and adiabatic analysis,” Section 1.3.16
“Unstable static problem: thermal forming of a metal sheet,” Section 1.3.17
