Matlab Fanuc Robot Control

From ESE497 Wiki

Revision as of 17:41, 5 October 2015 by Ed (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Place marker and metal can exactly as shown above
Turn on Robot
- Menu -> Setup -> Frames
  - Verify Tool Frame 1 is set to [0,0,0]
  - Verify Tool Frame 2 is set to [0,0,95.3] so that the TCP is at the end of the gripper
- Select -> LV_COM_FRM to select the Teaching Pendant Program to run the robot to PC communication program
- Turn Teaching Pendant to OFF
- Insert key into Controller and turn to T1 position
- Press Shift -> Reset on Teaching Pendant to clear any errors
- Press Green Start button on Controller
Download and extract MatlabLabVIEWFanuc.zip
Open and run LabVIEW\MatlabLabVIEWFanuc.vi
Open and run matlab\MatlabLabVIEWFanuc.m

<mediaplayer width=720 height=504>FILE:2015-10-02_16.53.54-1.flv</mediaplayer>

Retrieved from "http://classes.engineering.wustl.edu/ese497/index.php?title=Matlab_Fanuc_Robot_Control&oldid=2676"

Navigation menu