Signal Processing Basics

From ESE497 Wiki
Revision as of 14:37, 22 January 2014 by Ed (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • Cross Correlation
    • Homework 7
      • Plot the Cross Correlation of the 2 channels from Homework 6 and see if the peak is shifted from the middle, the number of samples you measured from the previous step.
        • Hints:
          • Functions -> Express -> Signal Analysis -> Conv & Corr -> Cross Correlation
          • This function requires that you extract the 2 channels from the DDT. To do this, use Functions -> Express -> Sig Manip -> From DDT -> Single Waveform -> Channel 0 and then again for Channel 1. Connect the outputs of these to the X and Y inputs.
          • Before you plot the Cross Correlation, extract the 1D array of scalars using the From DDT so that the X-Axis is in samples.
          • Look at the help on the Cross Correlation for details.
      • Plot the Spectrogram of Channel 0.
        • Hint: There is a good Spectrogram example that ships with LabVIEW. Go to Help -> Find Examples... and search for STFT -STFT Spectrogram Demo.vi. You can copy from this example and paste it into your code.
      • Create a subVI CalcCCPeak.vi that computes the relative delay between channels 0 and 1.