Difference between revisions of "Adafruit HUZZAH ESP8266 breakout"
From ESE497 Wiki
Jump to navigationJump to searchLine 4: | Line 4: | ||
* Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino) | * Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino) | ||
* Connect USB Console cable to board (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide) | * Connect USB Console cable to board (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide) | ||
+ | * Copy the Blink Test code from https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide to test. Red light should blink | ||
* Remember, before every download you have to: | * Remember, before every download you have to: | ||
**Hold down the GPIO0 button, the red LED will be lit | **Hold down the GPIO0 button, the red LED will be lit |
Revision as of 00:03, 24 February 2016
- Buy from AdaFruit (https://www.adafruit.com/products/2471)
- Don't forget cable (https://www.adafruit.com/product/954)
- Overview doc (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/overview)
- Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino)
- Connect USB Console cable to board (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide)
- Copy the Blink Test code from https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide to test. Red light should blink
- Remember, before every download you have to:
- Hold down the GPIO0 button, the red LED will be lit
- While holding down GPIO0, click the RESET button
- Release RESET, then release GPIO0
- When you release the RESET button, the red LED will be lit dimly, this means its ready to bootload
- (from https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide)