Difference between revisions of "Project2b: Put the sbRIO robots in motion"
From ESE497 Wiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
* Implement triangulation with rotation in simulation | * Implement triangulation with rotation in simulation | ||
** Our derivation assumes that the accoustic source is in the +y half plane of both microphone pairs so only put the sources in that region. | ** Our derivation assumes that the accoustic source is in the +y half plane of both microphone pairs so only put the sources in that region. | ||
| − | ** Make sure it works for Rotation = | + | ** Make sure it works for Rotation = 45 on the right microphone pair and Rotation = -45 for the left microphone pair. |
**Test on the 2 robot microphone array | **Test on the 2 robot microphone array | ||
* '''Modify''' MoveRobot vi to move the robot to the position on the SharedVariable sent from MicSourceLocator-Robots -> MicroPhonePairs. | * '''Modify''' MoveRobot vi to move the robot to the position on the SharedVariable sent from MicSourceLocator-Robots -> MicroPhonePairs. | ||
* Test out your triangulation with the robots in different position and rotations as commanded by MicSourceLocator-Robots. | * Test out your triangulation with the robots in different position and rotations as commanded by MicSourceLocator-Robots. | ||
*Modify MicSourceLocator (PC with Robots).vi to autmoatically move the robots towards the estimate source position. The goal is to position them 0.4m from the source rotated +/- 45 degrees from the x-axis. | *Modify MicSourceLocator (PC with Robots).vi to autmoatically move the robots towards the estimate source position. The goal is to position them 0.4m from the source rotated +/- 45 degrees from the x-axis. | ||
Revision as of 20:27, 22 June 2011
- Implement triangulation with rotation in simulation
- Our derivation assumes that the accoustic source is in the +y half plane of both microphone pairs so only put the sources in that region.
- Make sure it works for Rotation = 45 on the right microphone pair and Rotation = -45 for the left microphone pair.
- Test on the 2 robot microphone array
- Modify MoveRobot vi to move the robot to the position on the SharedVariable sent from MicSourceLocator-Robots -> MicroPhonePairs.
- Test out your triangulation with the robots in different position and rotations as commanded by MicSourceLocator-Robots.
- Modify MicSourceLocator (PC with Robots).vi to autmoatically move the robots towards the estimate source position. The goal is to position them 0.4m from the source rotated +/- 45 degrees from the x-axis.
