Difference between revisions of "The Experimental Setup"
ChuckHolmes (talk | contribs) |
ChuckHolmes (talk | contribs) |
||
Line 8: | Line 8: | ||
<br> | <br> | ||
− | Also seen in Figure 2 are thermocouples inserted into the tissue. A clearer view of the thermocouples can be seen in Figure 3. These thermocouple attached to a DATAQ device, seen in Figure | + | Also seen in Figure 2 are thermocouples inserted into the tissue. A clearer view of the thermocouples can be seen in Figure 3. These thermocouple attached to a DATAQ device, seen in Figure 4. This device is used to acquire temperature data from multiple (up to 8) channels via thermocouple. |
− | + | A second device used in the experiment is the ThermoHaake (the device with the screen as seen in Figure 5). This device has 3 purposes | |
+ | |||
+ | <t> 1) Heat the water bath. | ||
+ | |||
+ | This system measures the temperature in the tissue from 4 different channels and at the same time measures temperature from two points in the water bath. | ||
<br><br> | <br><br> | ||
[[File:Tcs.jpg|350px]] | [[File:Tcs.jpg|350px]] | ||
<br>'''Figure 3 - The housing placed in the water bath with a clear view of the thermocouples'''<br> | <br>'''Figure 3 - The housing placed in the water bath with a clear view of the thermocouples'''<br> | ||
+ | |||
+ | [[File:Windaq.jpg|350px]] | ||
+ | <br>'''Figure 4 - View of the Dataq'''<br> | ||
[[File:Haake.jpg|250px]] | [[File:Haake.jpg|250px]] | ||
− | <br>'''Figure | + | <br>'''Figure 5 - Overview of the Experimental Setup'''<br> |
− | |||
− | |||
− |
Revision as of 03:10, 12 May 2011
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.
Figure 1 - The tissue placed in it experimental housing
Figure 2 - The housing placed in the heated water bath
Also seen in Figure 2 are thermocouples inserted into the tissue. A clearer view of the thermocouples can be seen in Figure 3. These thermocouple attached to a DATAQ device, seen in Figure 4. This device is used to acquire temperature data from multiple (up to 8) channels via thermocouple.
A second device used in the experiment is the ThermoHaake (the device with the screen as seen in Figure 5). This device has 3 purposes
<t> 1) Heat the water bath.
This system measures the temperature in the tissue from 4 different channels and at the same time measures temperature from two points in the water bath.
Figure 3 - The housing placed in the water bath with a clear view of the thermocouples