Difference between revisions of "The Experimental Setup"
ChuckHolmes (talk | contribs) |
ChuckHolmes (talk | contribs) |
||
| Line 10: | Line 10: | ||
<br>'''Figure 3 - The housing placed in the water bath with a clear view of the thermocouples'''<br> | <br>'''Figure 3 - The housing placed in the water bath with a clear view of the thermocouples'''<br> | ||
| − | Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a | + | Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a DATAQ device. This system measures the temperature in the tissue |
[[File:Haake.jpg|250px]] | [[File:Haake.jpg|250px]] | ||
<br>'''Figure 4 - Overview of the Experimental Setup'''<br> | <br>'''Figure 4 - Overview of the Experimental Setup'''<br> | ||
| + | |||
| + | [[File:Windaq.jpg|250px]] | ||
| + | <br>'''Figure 5 - View of the Dataq'''<br> | ||
Revision as of 02:58, 12 May 2011
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.
Figure 1 - The tissue placed in it experimental housing
Figure 2 - The housing placed in the heated water bath
Figure 3 - The housing placed in the water bath with a clear view of the thermocouples
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a DATAQ device. This system measures the temperature in the tissue
Figure 4 - Overview of the Experimental Setup
Figure 5 - View of the Dataq
