Difference between revisions of "The Experimental Setup"
From ESE497 Wiki
Jump to navigationJump to searchChuckHolmes (talk | contribs) |
ChuckHolmes (talk | contribs) |
||
| Line 1: | Line 1: | ||
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2. | The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2. | ||
| + | |||
| + | [[File:Housing.jpg|400px]] | ||
| + | Figure 1 | ||
[[File:Waterbath.jpg|400px]] | [[File:Waterbath.jpg|400px]] | ||
| + | Figure 2 | ||
| − | + | Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue | |
| − | |||
| − | |||
Revision as of 02:41, 12 May 2011
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.
Figure 1
Figure 2
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue
