Difference between revisions of "The Experimental Setup"
From ESE497 Wiki
Jump to navigationJump to searchChuckHolmes (talk | contribs) |
ChuckHolmes (talk | contribs) |
||
Line 1: | Line 1: | ||
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2. | The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2. | ||
− | [[File:Waterbath.jpg]] | + | [[File:Waterbath.jpg|300px]] |
(pic 2) | (pic 2) | ||
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue | Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue |
Revision as of 02:40, 12 May 2011
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.
(pic 2)
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue