Difference between revisions of "Adafruit HUZZAH ESP8266 breakout"
From ESE497 Wiki
Jump to navigationJump to search (Created page with '* Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino)') |
|||
| Line 1: | Line 1: | ||
| + | * Buy from AdaFruit (https://www.adafruit.com/products/2471) | ||
| + | * Don't forget cable (https://www.adafruit.com/product/954) | ||
| + | * Overview doc (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/overview) | ||
* Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino) | * Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino) | ||
| + | * Connect USB Console cable to board (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide) | ||
| + | * Remember, before every download you have to: | ||
| + | **Hold down the GPIO0 button, the red LED will be lit | ||
| + | **While holding down GPIO0, click the RESET button | ||
| + | **Release RESET, then release GPIO0 | ||
| + | **When you release the RESET button, the red LED will be lit dimly, this means its ready to bootload | ||
| + | ** (from https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide) | ||
Revision as of 00:01, 24 February 2016
- Buy from AdaFruit (https://www.adafruit.com/products/2471)
- Don't forget cable (https://www.adafruit.com/product/954)
- Overview doc (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/overview)
- Follow instructions for adding support to the Arduino Environment for the ESP8266 chip (https://github.com/esp8266/Arduino)
- Connect USB Console cable to board (https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide)
- Remember, before every download you have to:
- Hold down the GPIO0 button, the red LED will be lit
- While holding down GPIO0, click the RESET button
- Release RESET, then release GPIO0
- When you release the RESET button, the red LED will be lit dimly, this means its ready to bootload
- (from https://learn.adafruit.com/adafruit-huzzah-esp8266-breakout/using-arduino-ide)
