Difference between revisions of "Matlab Fanuc Robot Control"

From ESE497 Wiki
Jump to navigationJump to search
Line 13: Line 13:
 
* Open and run LabVIEW\MatlabLabVIEWFanuc.vi
 
* Open and run LabVIEW\MatlabLabVIEWFanuc.vi
 
* Open and run matlab\MatlabLabVIEWFanuc.m
 
* Open and run matlab\MatlabLabVIEWFanuc.m
<mediaplayer width=720 height=504>FILE:2015-10-02_16.53.54.mp4</mediaplayer>
+
<mediaplayer width=720 height=504>FILE:2015-10-02_16.53.54.flv</mediaplayer>

Revision as of 17:31, 5 October 2015

IMG 1188.JPG

  • Place marker and metal can exactly as shown above
  • Turn on Robot
    • Menu -> Setup -> Frames
      • Verify Tool Frame 1 is set to [0,0,0]
      • Verify Tool Frame 2 is set to [0,0,95.3] so that the TCP is at the end of the gripper
    • Select -> LV_COM_FRM to select the Teaching Pendant Program to run the robot to PC communication program
    • Turn Teaching Pendant to OFF
    • Insert key into Controller and turn to T1 position
    • Press Shift -> Reset on Teaching Pendant to clear any errors
    • Press Green Start button on Controller
  • Download and extract MatlabLabVIEWFanuc.zip
  • Open and run LabVIEW\MatlabLabVIEWFanuc.vi
  • Open and run matlab\MatlabLabVIEWFanuc.m

<mediaplayer width=720 height=504>FILE:2015-10-02_16.53.54.flv</mediaplayer>