The Experimental Setup

The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.

Figure 1 - The tissue placed in it experimental housing

Figure 2 - The housing placed in the heated water bath

Figure 3 - The housing placed in the water bath with a clear view of the thermocouples

Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a DATAQ device. This system measures the temperature in the tissue

Figure 4 - Overview of the Experimental Setup

Figure 5 - View of the Dataq