Difference between revisions of "The Experimental Setup"

From ESE497 Wiki
Jump to navigationJump to search
Line 2: Line 2:
  
 
[[File:Housing.jpg|400px]]
 
[[File:Housing.jpg|400px]]
<br>'''Figure 1 - The tissue placed in it experimental housing'''
+
<br>'''Figure 1 - The tissue placed in it experimental housing'''<br>
  
 
[[File:Waterbath.jpg|400px]]
 
[[File:Waterbath.jpg|400px]]
<br>'''Figure 2 - The housing placed in the heated water bath'''
+
<br>'''Figure 2 - The housing placed in the heated water bath'''<br>
 +
 
 +
[[File:Tcs.jpg|400px]]
 +
<br>'''Figure 3 - The housing placed in the water bath with a clear view of the thermocouples'''<br>
  
 
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue
 
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue

Revision as of 02:47, 12 May 2011

The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.

Housing.jpg
Figure 1 - The tissue placed in it experimental housing

Waterbath.jpg
Figure 2 - The housing placed in the heated water bath

Tcs.jpg
Figure 3 - The housing placed in the water bath with a clear view of the thermocouples

Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue