Difference between revisions of "The Experimental Setup"
From ESE497 Wiki
Jump to navigationJump to searchChuckHolmes (talk | contribs) |
ChuckHolmes (talk | contribs) |
||
| Line 2: | Line 2: | ||
[[File:Housing.jpg|400px]] | [[File:Housing.jpg|400px]] | ||
| − | <br>Figure 1 | + | <br>'''Figure 1 - The tissue placed in it experimental housing''' |
[[File:Waterbath.jpg|400px]] | [[File:Waterbath.jpg|400px]] | ||
| − | Figure 2 | + | <br>'''Figure 2 - The housing placed in the heated water bath''' |
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue | Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue | ||
Revision as of 02:43, 12 May 2011
The methods of this work involved the measurement of temperature and synchronous ultrasonic imaging of tissue in a water bath. The tissue was usually a piece of turkey purchased from a local grocery store or a piece of preserved rabbit liver. The tissue was placed in experimental housing as seen in Figure 1. This housing was then placed in a water bath in an insulated container, as seen in Figure 2.
Figure 1 - The tissue placed in it experimental housing
Figure 2 - The housing placed in the heated water bath
Also seen in Figure 2 are thermocouples inserted into the tissue. These thermocouple attached to a WINDAQ device. This system measures the temperature in the tissue
